Cloudgenix SDWAN ion1000 limitation

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Cloudgenix SDWAN ion1000 limitation

L1 Bithead

Cloudgenix SDWAN ion1000 limitation has the following limitation .

1) NAT wont work at times 

2) multiple dot1q in LAN interfaces .

 

DO anyone faced such issues ?

4 REPLIES 4

L1 Bithead

Hi Suresh, there are no known issues that I am aware of, but would need more info to assist:

 

1) Can you provide more info on what exactly is not working with your NAT?

2) The ION1000 does support dot1q on LAN interfaces, what is the issue you're facing?

1)NAT issue 

we have seen instances that the direct internet traffic for applications like zoom is not getting exiting from the appliance . On further troubleshooting , found the NAT translations are not happening . To fix the issue , the box need to rebooted .

2) Dot1q issue

WHen we configure more than 5 or 6 dot1q interfaces , many end host is loosing connection to the gateway . The Arp is not getting completed . So whenever we do a deployment , do limited to number of dot1q interfaces creating on the device 

 

L1 Bithead

Suresh, what code are you running on the IONs? Neither of these are expected behaviors, if a code upgrade does not address them then please raise a support ticket and have them investigated.

L1 Bithead

code : 

5.6.1-b13 

 
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!