SD-WAN branches not reaching other branches through hub in an mesh VPN cluster

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

SD-WAN branches not reaching other branches through hub in an mesh VPN cluster

L0 Member

hey guys hello, i successfully implemented an SD-WAN full mesh between 1 hub and 3 branches.

each FW has 1 LAN and 2 WANs, WAN1 on ISP1 and WAN2 on ISP2.

to test the full mesh connection and force branches to reach each other through the HUB is removed ISP1 on branch 1 and also removed ISP2 on branch 2.

i checked the bgp fib on the hub i can find the LANs of branch 1(learned through ISP2 as i removed ISP1) and branch 2(learned from ISP1 as i removed ISP2), the problem is that the hub is not redistributing the routes to both branches the fib of branch 1 don't contain branch 2 networks same for branch 2 fib it doesn't contain branch 1 networks. any idea about this problem ?

0 REPLIES 0
  • 1816 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!