06-05-2020 06:13 AM
Hi community,
so after an update from 9.0 to 9.1.2-h1 on an PA-220 the autocommit fails so that the Dataplane seems to not come up.
I could not find a known issue for that.
Is it just because it's a beta?
Here is the corresponding part of the system log:
[...]
2020/06/02 23:57:46 high general general 0 Autocommit job failed
2020/06/02 23:57:43 info sslmgr sslmgr- 0 SSLMGR daemon configuration load phase-1 aborted.
2020/06/02 23:57:43 info satd satd-co 0 SATD daemon configuration load phase-1 aborted.
2020/06/02 23:57:43 info ras rasmgr- 0 RASMGR daemon configuration load phase-1 aborted.
2020/06/02 23:57:42 info vpn ike-con 0 IKE daemon configuration load phase-1 aborted.
2020/06/02 23:57:42 info routing routed- 0 Route daemon configuration load phase-1 aborted.
2020/06/02 23:57:36 info satd satd-co 0 SATD daemon configuration load phase-1 succeeded.
2020/06/02 23:57:35 info sslmgr sslmgr- 0 SSLMGR daemon configuration load phase-1 succeeded.
2020/06/02 23:57:33 info ras rasmgr- 0 RASMGR daemon configuration load phase-1 succeeded.
2020/06/02 23:57:31 info vpn ike-con 0 IKE daemon configuration load phase-1 failed.
2020/06/02 23:57:25 info routing routed- 0 Route daemon configuration load phase-1 succeeded.
2020/06/02 23:57:08 info general general 0 Auto update agent found no new WildFire updates
2020/06/02 23:57:08 high general general 0 Failed to check WildFire content upgrade info due to generic communication error
2020/06/02 23:57:07 info general general 0 Connection to Update server closed: updates.paloaltonetworks.com, source: [....]
2020/06/02 23:56:20 info general general 0 Failed to connect to Panorama Server: [...] Port: [....] Retry: 0
2020/06/02 23:56:04 info general general 0 AutoCom job started processing. Dequeue time=2020/06/02 23:56:04. Job Id=[..].
2020/06/02 23:56:04 info general general 0 AutoCom job enqueued. Enqueue time=2020/06/02 23:56:04. JobId=3. . Type: Full
[...]
Does maybe anyone had the same problem or does anyone know why this occurs?
Best regards,
Marc
