Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

CVE-2023-38802

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

CVE-2023-38802

L3 Networker

Hi,

 

Regarding CVE-2023-38802, DDOS in BGP software,  would this apply only to public ASNs/BGP sessions established on public internet?   I have BGP configured on PAN firewalls but only running BGP over IPSec tunnels using private ASNs

 

I would think this vulnerability would not apply but didn't want to assume

 

https://security.paloaltonetworks.com/CVE-2023-38802

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Hello @securehops

 

this issue is triggered by sending crafted BGP update message. If you are running BGP internally within your network only and all your BGP devices are in your control, then I would say you are not affected (Unless somebody you are peering internally sends malicious BGP update).

 

This issue is not limited to Palo Alto only. End of last month similar issue was reported by Juniper CVE-2023-4481.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.

View solution in original post

6 REPLIES 6

Cyber Elite
Cyber Elite

Hello @securehops

 

this issue is triggered by sending crafted BGP update message. If you are running BGP internally within your network only and all your BGP devices are in your control, then I would say you are not affected (Unless somebody you are peering internally sends malicious BGP update).

 

This issue is not limited to Palo Alto only. End of last month similar issue was reported by Juniper CVE-2023-4481.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.

L0 Member

Any reason it says it is fixed in 11.0.3 (https://security.paloaltonetworks.com/CVE-2023-38802), but the 11.0.3 known and addressed issues does not show it?

11.0.3 is not impacted.   The impacted versions are < 11.0.3

Cyber Elite
Cyber Elite

For any drive-by browsers, you can secure your BGP connections only to/from specific IP addresses with an allow security policy rule followed by a drop rule.  Then your NGFW will only allow BGP packets from configured peers.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

L0 Member

Thanks, yes the release notes "usually" state that the issue was addressed. In this case it does not. We are on 11.0.2, an affected ver and want to move to 11.0.3, the not impacted ver. But first want to confirm on the release notes that it was a fixed addressed issue. 

true, good point.  They had so many addressed issues in 11.0.3, they forgot that one 😂

  • 1 accepted solution
  • 9348 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!