DNS sinkhole v9.0.1

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

DNS sinkhole v9.0.1

L2 Linker

Have 2 HA VMs with 9.0.1

 

Following this article: https://docs.paloaltonetworks.com/pan-os/9-0/pan-os-admin/threat-prevention/use-dns-queries-to-ident...

 

In section 3), how does this need to be configured ((addr.dst in 10.15.0.20) ) when using Palo Alto Networks Sinkhole IP (sinkhole.paloaltonetworks.com) ?

 

Thanks.

Ho

8 REPLIES 8

Cyber Elite
Cyber Elite

Hello,

Its whatever you configured in your anti-spyware policies.

 

image.png

 

Regards,

Hello,

 

From https://docs.paloaltonetworks.com/pan-os/9-0/pan-os-admin/threat-prevention/use-dns-queries-to-ident...

 

The IP addresses currently are IPv4—sinkhole.paloaltonetworks.com and a loopback address IPv6 address—::1. These address are subject to change and can be updated with content updates.

 

As per my previous update, in PAN-OS v9.0.1:

 

sinkhole_9.0.1.png

just use the configured IPV4 dns address

MP

Help the community: Like helpful comments and mark solutions.

The only options available are the loopback or the PAN URL:

sinkhole.png

 

There is no IPV4 available for the PAN networks. 

@Velo-JV in the drop-down, yes

Just type a different IP 🙂

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Ahh ok got it. Is there a list of available sinkhole IPs that Palo Alto hosts? I am following along their guide "See Infected Hosts that Attempted to Connect to a Malicious Domain" and the report you create needs you to specify a specific IP destination, which has gone away in 9.0.

 

Thank you,

Jonathan

The panw hosted one is sinkhole.paloaltonetworks.com, by you can use any IP, preferably something that's not on the internet and not in your network either (unless you have a Honeypot)

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Got it sounds good. Thanks for the quick response.

  • 9787 Views
  • 8 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!