About sue_town

Hi gotta really wierd problem... PA 200 configured for DHCP eth1/2 Layer 3 IP address 10.130.8.25/24 default route via eth 1/2 eth1/2 connected to port on CISCO 2960S switch PC connected to port on same CISCO 2960S switch IP config IP Address. . . . . . . . . . . . : 10.130.8.151 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.130.8.25 Switch config..... interface Vlan1 ip address 10.130.8.20 255.255.255.0 and also ip default-gateway 10.130.8.25 all interfaces are in this default vlan1 PC gets IP address from PA ok PC can ping switch IP 10.130.8.20 PC cannot ping PA eth 1/2 10.130.8.25 PA has 1 rule ANY ANY ALLOW COnsole access to PA and cannot ping switch at 10.130.8.20 LAN does not seem to be up in PA 200.... appreciate any help...problem is driving me insane thanks ... View more

hi just setting up a PA 200 - i have the URL and virus all up to date box is running PAN OS 4.1.0 i have 5 of these boxes to upgrade so i downloaded PAN OS 4.1.1 and 4.1.2 i goto software option and select install from file - and i just see software file IMG and no drop down options...where do i need to locate the downloaded OS files for the PAN to see these? thanks ... View more