About DavidyPalo

Hi PA(non-management interface) is connected to a router via a cable .  What is minimus condition for the two device to ping each other? 1. ip address in interface are in same subnet, 2.  interface associated with management profile to allow ping  3. interface type is L3   Any else?    The reason why i ask the question is the two device cannot see each other via arp. is this physical connection issue?  Thanks ... View more

Hi Initial configuration is like the below. why we cannot ping 192.168.8.100 ? i would like to allow the firewall to be ping and accessed via https. Maybe it need to add some command . Anyone can provide some suggestion? Thank you   admin@PA-VM> configure admin@PA-VM# delete deviceconfig system type dhcp-client admin@PA-VM #set deviceconfig system type static admin@PA-VM# set deviceconfig system ip-address 192.168.8.100 netmask 255.255.255.0 admin@PA-VM# commit ... View more

Hi Management interface ip address is configured, and it could work before. but now I cannot see it. After the ip address is reconfigured(and commit), I still cannot see it. Below is its config. Anyone can take a look at it? Thank you!   set deviceconfig system ip-address 192.168.1.6 netmask 255.255.255.0 default-gateway 192.168.1.1     show interface management ------------------------------------------------------------------------------- Name: Management Interface Link status: Runtime link speed/duplex/state: unknown/unknown/down Configured link speed/duplex/state: auto/auto/auto MAC address: Port MAC address 08:66:66:66:66- Ip address: unknown Netmask: unknown Default gateway: Ipv6 address: unknown Ipv6 link local address: unknown Ipv6 default gateway: ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Logical interface counters: ------------------------------------------------------------------------------- bytes received 3629 bytes transmitted 4362 packets received 47 packets transmitted 15 receive errors 0 transmit errors 0 receive packets dropped 0 transmit packets dropped 0 multicast packets received 1 ... View more

Hi Is it possible to setup and practice Panorama without license at lab for practice? thanks   ... View more

Hi U-turn nat is configured for trust user to ping server located at DMZ. After the user ping the server from trust zone to dmz zone, the security policy count increases, but nat policy count does not increase. Is this normal? if not, why it happen? thank you         ... View more