hi all, i need to setup two PA-2050 ( HA mode ) but am not sure about the design were i need some help her, the customer network is devided into vlans and they all communicato to each other through the corre switch ( cisco 6500) and if they require internet access the core switch will route them to a firewall ( firewall module in the core sw ) , now obviously i cant setup the appliances in vwire mode since there are no physical cables ( all virtual links and vlan ) so i was thinking to make a defult route on the customer switch to redirect internet traffic to the PA device then it routes back to the core sw , not wccp as i know they call this one leg setup am just wondering if it can achieved by the PA appliance . am attaching a diagram of what am looking for .
... View more