About ChristerJohanssonR

ChristerJohanssonR · ‎09-24-2018

Hi, The scenarios is as follows: a) I have a Windows10-client with Global Protect (GP) version 4.1.4 installed b) The Win10 has inbound RDP (tcp-3389) enabled so that the support can access the client remotely c) The GP is configured with "Always On" so that it connect to our company network as soon as it finds an ISP-connection The problem: a) While the GP-client is connected to our company network, it is still accepting incoming RDP-connections on the INTERNET-adapter The question: Is it possible to "block" inbound RDP-connections from INTERNET while the GP-client is active or do I have to do that with either Windows own firewall or a third party firewall software?

ChristerJohanssonR · ‎02-24-2015

I have purchased two (2) Panorama devices M-100 to be setup in HA-mode. A couple of questions: a) There are two interfaces in the front. One for Management, but what is the second one (the one to the right) used for? b) The devices are "active/passive" or actually "primary/seconday" with a management address of its own. Which address do I put on the firewalls' "Panorama setting"? The primary or secondary? Sorry for these noob-questions. //Christer J.

Date Registered	‎11-06-2014 01:04 AM
Date Last Visited	Friday
Total Messages Posted	3

Online Status	Offline
Date Last Visited	Friday

About ChristerJohanssonR

Global Protect client - Block inbound traffic - Internet Adapter

Deploying Panorama M-100 in HA mode

Re: Deploying Panorama M-100 in HA mode

Global Protect client - Block inbound traffic - Internet Adapter

Deploying Panorama M-100 in HA mode

Strata

Prisma

Cortex

About ChristerJohanssonR

Global Protect client - Block inbound traffic - Internet Adapter

Deploying Panorama M-100 in HA mode

Re: Deploying Panorama M-100 in HA mode

Global Protect client - Block inbound traffic - Internet Adapter

Deploying Panorama M-100 in HA mode