About Mariusz.pianka

Well, The ISP of the end user is UPC and the IPv6 is provided by the ISP to the ISP provided router. test ipv6 results:   http://test-ipv6.com/?ip4=37.228.241.77&ip6=2a02:8084:2a60:2000:b02a:14aa:8800:3ca0&a=ok,3438&aaaa=ok,557&ds=ok,765&ipv4=ok,338&ipv6=ok,389&v6mtu=ok,1671&v6ns=timeout,10958&dsmtu=ok,404&failed_sites=7f24       ISP gives out only IPv6 or IPv6 and IPv4 both? Both I guess.   Can user uncheck "IPv6 checkbox" under adapter settings and try then? Same result,    IPv6 is disabled on PA, we haven't enabled it.  What IP address would i give it to the interface?  I'd say I'd have to obtain one from ISP before I could enable it on the PA right ?  ... View more

Hi Guys, I wanted to continue to on this thread as it's somewhat related.    We have PA-3020 running PAN-ON 6.1.10 We have encountered problems with our staff member who is unable to connect to our Global Protect portal. Up on investigation we found that the ISP issues IPv6 address(!)  When the individual goes to "whats my ip" in google, the IP address that shows up is a long IPv6 address and the ISP shows as "Google"    However, when he goes to other website, http://www.whatsmyip.org/ that shows IPv4  We had a look at our logs, and we can see connection attempts from IPv4 provided. There is nothing out of ordinary, there are even packets exchanged. However the user is unable to connect.    We asked him to create an AP from his phone and connect this way and that worked. Can somebody elaborate on the issues we are experiencing?  If I were to go to the ISP what should I tell them ? So far, according to them everything works...   Any thoughts?   Thanks Mariusz ... View more

The pattern for chrome used says only " Pattern:      Chrome/" We try to do the same but for internet explorer. We want to allow Chrome but not Internet Explorer. What "Pattern: " should we use ?  Should we be looking at user-agent ?    ... View more

Thank You Phil, Using your string and manipulating it a little bit, I was able to adapt it to my needs. Much appreciated. ... View more

Hi Guys, I'm trying to create the pattern to reset the connection if the connection comes from Internet Explorer. I took PCAP with wireshark and user-agent shows as : "Mozilla/5.0 (Windows NT 6.1; WOW64; Trident/7.0; rv:11.0) like Gecko" (there is \r\n at the end but I think its wireshark? ) Nevertheless I copied my text to RegExr; and did my regular expression to match. .*Mozilla\/5\.0\s\(Windows\sNT\s6\.1\;\sWOW64\;\sTrident\/7\.0\;\srv\:11\.0\)\slike\sGecko it highlights the text, meaning It is a valid expression, Palo Alto takes it, and while I was troubleshooting I even got some hits but internet explorer works as normal. Can you tell if this is even possible? ... View more