About Chango

Hi all,   I have some problems with LACP. Sometimes, randomly, the interfaces move out of AE-group. I can see from log this error message: "receive PDU partner does not match local actor ". Below the file l2ctrld.log .         2019-09-17 23:19:54.588 +0200 ethernet1/10 idx 73 received pdu partner does not match local actor 2019-09-17 23:19:54.588 +0200 Recved LACPDU actor: sys_pri 32768, system_mac X, key 22, port_pri 32768, port_num 10245, state 0x47 partner sys_pri 0, system_mac X idx 73 received pdu partner does not match local actor 2019-09-17 23:19:54.588 +0200 Recved LACPDU actor: sys_pri 32768, system_mac X, key 22, port_pri 32768, port_num 10245, state 0x47 partner sys_pri 32768, system_mac X, key 16, port_pri 32768, port_num 73, state 0x2 2019-09-17 23:20:00.338 +0200 ethernet1/10 idx 73, mux state change ATTACHED=>RX_TX 2019-09-17 23:20:00.338 +0200 ethernet1/10 idx 73, mux state in RX_TX 2019-09-17 23:20:00.338 +0200 post LACP event to DP: if_idx 73, up 1 2019-09-17 23:20:00.338 +0200 log ethernet1/10 idx 73 join lag 2019-09-17 23:20:09.838 +0200 Got port 73 event, link 0, speed 4, duplex 2 2019-09-17 23:20:09.838 +0200 port 73 is full duplex. Enable lacp 2019-09-17 23:20:09.838 +0200 ethernet1/10 idx 73 mux state change RX_TX=>ATTACHED, select_state Unselected(Link down), partner state 0x3f 2019-09-17 23:20:09.838 +0200 post LACP event to DP: if_idx 73, up 0 2019-09-17 23:20:09.838 +0200 log ethernet1/10 idx 73 leaves lag. sel state Unselected(Link down) 2019-09-17 23:20:10.088 +0200 ethernet1/10 idx 73, mux state change ATTACHED=>DETACHED 2019-09-17 23:20:13.087 +0200 ethernet1/10 idx 73, current_while expired. 2019-09-17 23:20:13.087 +0200 ethernet1/10 idx 73, rx state change CURRENT=>EXPIRED 2019-09-17 23:20:16.087 +0200 ethernet1/10 idx 73, current_while expired. 2019-09-17 23:20:16.087 +0200 ethernet1/10 idx 73, rx state change EXPIRED=>DEFAULTED 2019-09-17 23:20:42.119 +0200 ethernet1/8 idx 71 set to unselected, clear actor sync 2019-09-17 23:20:42.338 +0200 ethernet1/8 idx 71 mux state change RX_TX=>ATTACHED, select_state Unselected(Negotiation failed), partner state 0x3 2019-09-17 23:20:42.338 +0200 post LACP event to DP: if_idx 71, up 0 2019-09-17 23:20:42.338 +0200 log ethernet1/8 idx 71 leaves lag. sel state Unselected(Negotiation failed) 2019-09-17 23:20:42.588 +0200 Got port 71 event, link 0, speed 4, duplex 2 2019-09-17 23:20:42.588 +0200 port 71 is full duplex. Enable lacp 2019-09-17 23:20:42.588 +0200 ethernet1/8 idx 71, mux state change ATTACHED=>DETACHED 2019-09-17 23:20:46.087 +0200 ethernet1/8 idx 71, current_while expired. 2019-09-17 23:20:46.087 +0200 ethernet1/8 idx 71, rx state change CURRENT=>EXPIRED 2019-09-17 23:20:49.087 +0200 ethernet1/8 idx 71, current_while expired. 2019-09-17 23:20:49.087 +0200 ethernet1/8 idx 71, rx state change EXPIRED=>DEFAULTED 2019-09-17 23:21:34.142 +0200 ethernet1/20 idx 83 received pdu partner does not match local actor 2019-09-17 23:21:34.143 +0200 Recved LACPDU actor: sys_pri 127, system_mac X, key 2, port_pri 127, port_num 2, state 0x47 partner sys_pri 1, system_mac 00:00:00:00:00:00, key 2, port_pri 1, port_num 2, state 0x46 2019-09-17 23:21:34.338 +0200 ethernet1/20 idx 83 mux state change RX_TX=>ATTACHED, select_state Selected, partner state 0x47 2019-09-17 23:21:34.338 +0200 post LACP event to DP: if_idx 83, up 0 2019-09-17 23:21:34.338 +0200 log ethernet1/20 idx 83 leaves lag. sel state Selected 2019-09-17 23:21:36.587 +0200 ethernet1/20 idx 83, mux state change ATTACHED=>RX_TX 2019-09-17 23:21:36.588 +0200 ethernet1/20 idx 83, mux state in RX_TX 2019-09-17 23:21:36.588 +0200 post LACP event to DP: if_idx 83, up 1 2019-09-17 23:21:36.588 +0200 log ethernet1/20 idx 83 join lag 2019-09-17 23:24:35.087 +0200 log ethernet1/7 idx 70 leaves lag. sel state Unselected(Link down) 2019-09-17 23:24:42.087 +0200 log ethernet1/9 idx 72 leaves lag. sel state Unselected(Link down) 2019-09-17 23:25:09.087 +0200 log ethernet1/10 idx 73 leaves lag. sel state Unselected(Link down) 2019-09-17 23:25:42.087 +0200 log ethernet1/8 idx 71 leaves lag. sel state Unselected(Link down) 2019-09-17 23:29:35.087 +0200 log ethernet1/7 idx 70 leaves lag. sel state Unselected(Link down) 2019-09-17 23:29:42.087 +0200 log ethernet1/9 idx 72 leaves lag. sel state Unselected(Link down) 2019-09-17 23:30:09.087 +0200 log ethernet1/10 idx 73 leaves lag. sel state Unselected(Link down) 2019-09-17 23:30:42.087 +0200 log ethernet1/8 idx 71 leaves lag. sel state Unselected(Link down) 2019-09-17 23:34:35.087 +0200 log ethernet1/7 idx 70 leaves lag. sel state Unselected(Link down)               Could you help me? THX   ... View more

Hi all, I have updated ubuntu server from version 14.04.05 to 16.04.06. When i run the follow command : $ sudo -u minemeld /opt/minemeld/engine/current/bin/supervisorctl -c /opt/minemeld/local/supervisor/config/supervisord.conf status i got the follow error: Someone could help me? Thanks ... View more

Hi all,   I'm using PaloAlto's API for the first time. My idea is the following:    - for each rule, I would like to apply a security profile based on the service setted.   Reading some docs online i wrote this pseudocode.     HOSTNAME = '192.168.55.10' API_KEY = 'My_Api_Key' fw = pandevice.firewall.Firewall(hostname=HOSTNAME, api_key=API_KEY) rulebase = pandevice.policies.Rulebase() fw.add(rulebase) rules = pandevice.policies.SecurityRule.refreshall(rulebase) for rule in rules:        if (rule.service is ugual to any):                  //set security_profile (like av,URL Filtering Profiles,Vulnerability Protection Profiles,etc...)        rule.apply() fw.commit(sync=True)     Do you have any ideas ? Could you help me? Thanks in advice!     ... View more