About MichaelMedwid

I have dozens of small offices across the country and dozens more coming. My predecessor put in  DMVPN with Cisco ISRs at the spoke sites. I'm thinking to replace the ISRs with PAN 220s or similar. The only downside is they don't have POE for the access points. But should be able to work around that somehow.    My question is how to most rapidly and easily deploy the small PANs. They should all have common policies. But each would have a different Internet IP address and three subnets on three sub interfaces. They need to tunnel to a pair of PANs at the data center. What's the fastest way to get them loaded with configuration so they can be shipped, have the ISP facing IP address and route  changed via remote session, complete the configuration from the home office? ... View more

I am thinking to put a small pan between an Internet connected Cisco 4331 ISR and a Meraki switch. Will the PAN just pass all the tagged frames along and will the PAN be able to process the traffic from all those VLANs/tagged frames? Or would I need to configure VLANs on the PAN?     [Cisco ISR 4331]-Int Gi0/0 0/0.1 0/0.2 0/0/3------[L2 PAN]-----------802.1q Trunk[Meraki 225] ... View more