Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Live
- ›
- About sue_town
About sue_town
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
02-10-2012
05:01 AM
Hi gotta really wierd problem... PA 200 configured for DHCP eth1/2 Layer 3 IP address 10.130.8.25/24 default route via eth 1/2 eth1/2 connected to port on CISCO 2960S switch PC connected to port on same CISCO 2960S switch IP config IP Address. . . . . . . . . . . . : 10.130.8.151 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.130.8.25 Switch config..... interface Vlan1 ip address 10.130.8.20 255.255.255.0 and also ip default-gateway 10.130.8.25 all interfaces are in this default vlan1 PC gets IP address from PA ok PC can ping switch IP 10.130.8.20 PC cannot ping PA eth 1/2 10.130.8.25 PA has 1 rule ANY ANY ALLOW COnsole access to PA and cannot ping switch at 10.130.8.20 LAN does not seem to be up in PA 200.... appreciate any help...problem is driving me insane thanks
... View more
01-31-2012
07:40 AM
Thanks for the reply...Yes i missed the upload option....I have been able to upload 4.1.1 ok as downloaded from the palo alto support site - but unable to upload 4.1.2 as downloaded from the palo alto web site...seems to be an issue with this file anyway thanks for your help, Sue
... View more
01-28-2012
03:02 AM
hi just setting up a PA 200 - i have the URL and virus all up to date box is running PAN OS 4.1.0 i have 5 of these boxes to upgrade so i downloaded PAN OS 4.1.1 and 4.1.2 i goto software option and select install from file - and i just see software file IMG and no drop down options...where do i need to locate the downloaded OS files for the PAN to see these? thanks
... View more
10-11-2011
05:18 AM
yeh thanks - thought of this already but really just wanted to add a 3rd email without adding a DL S
... View more
10-11-2011
04:07 AM
Hi we have a profile set up for critical events - there seems to be a TO and CC field but anyone know how to add a 3rd address? thanks Sue
... View more
09-16-2011
06:35 AM
thanks for the reply device is employed at corporate office - using split tunnelling so local internet access and all other traffic via IPSEC tunnel to corp. network. i have device (and client DHCP) set with primary DNS pointing to corporate DNS server and secondary pointing to external DSN server given the above, can you provide detailed information re your solution and how i would implement? thanks Sue
... View more
09-15-2011
11:43 PM
Hi anyone know how to add more than 2 DNS servers on the PA 500 units and also in the client DHCP config PA say it cant be done and ive requested this to be considered for a future release...but wondering if anyone else has come across this? cheers Sue
... View more
08-31-2011
12:57 AM
just to let you know this is resolved the issue was that the default route was set to go via an interface rather than IP address - once i changed it to IP, all web browsing and DNS worked fine just for info thanks for replies Sue
... View more
08-30-2011
06:44 AM
thanks for your reply....but the traffic over the VPN tunnel into the companys network is working ok the issue is just with internet access and DNS it seems... Sue
... View more
08-30-2011
06:11 AM
Hi I am seeing traffic denied from untrust to untrust per my last global deny rule application not applicable dosent seem to be any other deny thanks Sue
... View more
08-30-2011
05:27 AM
Hi Have a PA 500 set up for split tunnelling - so clients access internet locally and all other traffic is passed over VPN tunnel to our office I have DHCP set up on PA box so clients get primary DNS server (local ISP one) and secondary DNS (office one) I have set up a rule from trust to untrust to allow application DNS and service DNS however i am getting errors saying failed to resolve domain name so I SSH to the box and cannot ping host www.yahoo.com nor can i ping host yahoo.com by IP any ideas please? thanks Sue
... View more
08-06-2011
03:47 AM
also the HA connections are Primary eth0/11 connects to secondary eth0/11 eth0/12 connects to secondary eth0/12 and i see that both devices are showing Mode Active passive on the HA dash
... View more
08-05-2011
07:11 PM
hi dominic no commits or updates happening....the trust/untrust ports do connect to the same switch wierd problem... thanks Sue
... View more
08-05-2011
05:40 AM
I have 2 PA 2020's which have been running HA fine for about 2 weeks now i see in the device that eth1/11 is showing as red/down in both firewalls the system log shows per attached log (for pri and sec firewalls) anyone have any ideas re this HA issue please? thanks
... View more
07-25-2011
04:12 AM
thanks for all the information I have got the 2 2020's configured and in sync so now I will import to panorama appreciate all the info Sue
... View more
07-19-2011
07:21 AM
if there is a way to import a production PA firewall config into Panorama, can someone please post the steps needed to do this? thanks Sue
... View more
07-18-2011
06:10 PM
ok thanks so lets say I have a standalone PA500 thats working and in production and then we decide to buy a panorama server - is there a way to get the configured box into Panorama? Sue
... View more
07-17-2011
09:53 PM
I heard its best to manage the firewalls in Panorama. I have imported the primary and secondary firewalls into Panorama.....i had 1 security rule that i added directly into the firewall (not via Panorama) - any ideas why i cant see this rule from Panorama? just trying to understand this before i start adding rules and updating the firewalls thanks for any help Sue
... View more
06-27-2011
08:59 AM
hello thanks for your reply i telnet to firewall and ping host updates.paloaltonetworks.com ping unknown host traceroute host updates.paloaltonetworks.com updates.paloaltonetworks.com name or service not known cannot handle host cmdline arg updates.paloaltonetworks.com on position 1 (argc 2) i was trying to do the quick start set up and add DNS server and register device and download license keys but this fails sorry about this...appreciate your help S
... View more
06-27-2011
07:58 AM
thanks well should be ok since just connected to a switch.....which then connects to current firewalls in use which allow the PA 2020 access out.... any other ideas please anyone?
... View more
06-27-2011
07:07 AM
hello just setting up a PA 2020 which has a management IP configured - should this be enough to perform license key registrations/downloads? eth1/1 vwire untrust eth1/2 vwire trust when i telnet to device i cannot ping a public IP address i have 1 policy from trust/any/any/any to untrust/any/any/any allow thanks for any help S
... View more
06-24-2011
06:31 AM
thanks for the reply and info - we are currently using CISCO routers to build the IPSEC GRE tunnels - would i still need to use the CISCO router to do this with the PA 500 firewall - or just the PA 500? thanks S
... View more
06-23-2011
07:20 AM
We are installing some PA 500 firewalls at various sites within our company each site has 1 connection to the internet - my question is if I want to install a dynamic multipoint VPN tunnel to connect this site to the company network and all traffic will use this - apart from internet traffic which will be pushed out locally - do I need one or two ISP circuits to do this? thanks for any help Sue
... View more
08-18-2015
26Posts
0Likes
0Solutions
Aug 18, 2015Last Visited
User
Activity
User
Profile
Latest posts by sue_town
| Subject | Views | Posted |
|---|---|---|
| 245 | 02-13-2012 06:24 AM | |
| 386 | 02-10-2012 05:01 AM | |
| 173 | 01-31-2012 07:40 AM | |
| 335 | 01-28-2012 03:02 AM | |
| 219 | 10-11-2011 05:18 AM |
User Badges
Public Statistics
| Date Registered | 06-22-2011 07:00 AM |
| Date Last Visited | 08-18-2015 09:07 AM |
| Total Messages Posted | 26 |
Contact Me
| Online Status |
Offline
|
| Date Last Visited |
08-18-2015
09:07 AM
|
Latest Tags
No tags yet
Latest Blogs
Latest Posts
Copyright 2007 - 2020 - Palo Alto Networks
