HI all, Hope i can find someone amazing out there. We have a VM100 that can only be configured from CLI as the provider that does not support any way to access a VM or webUI I spent 4 hours on the phone with Palo Alto support and they could not help me. Quick Break down. simple /30 link using vlan 948 Palo Alto ip 172.20.0.82 MPLS ip 172.20.0.81 Here is the base config i set : set network profiles interface-management-profile Trusted http no https yes ping yes response-pages yes snmp yes ssh yes telnet no set network profiles interface-management-profile Partner http no https no ping yes response-pages no snmp no ssh no telnet no set network profiles interface-management-profile Untrusted http no https no ping no response-pages no snmp no ssh no telnet no set network interface ethernet ethernet1/1 link-state auto link-duplex auto link-speed auto layer3 units ethernet1/1.948 tag 948 interface-management-profile Trusted ip 172.20.0.82/30 set network virutal-router VirutalRouter1 interface ethernet1/1.948 set zone MPLS network layer3 ethernet1/1.948 set deviceconfig system ip-address 10.120.100.254 netmask 255.255.255.0 default-gateway 10.120.100.1 dns-setting servers primary 8.8.8.8 secondary 4.4.4.4 Commit No replies when i ping Any help would be great. Just remmeber no webUi 😞
... View more