About leole

leole · ‎03-15-2013

Thanks for the info Leo

leole · ‎02-14-2013

Hi Johan, How do you make your PA box passed the BEAST vulnerablity scan? Thanks Leo

leole · ‎09-29-2011

Thank you Bill, It works for me. Leo

leole · ‎09-28-2011

Hi Bill, How did you set up the proxies? I got the same error between PAN4020 and ASA5510 Thanks. Leo lle@socccd.edu

leole · ‎11-10-2010

Hello, Our Panorama has set up with several PAN devices like 500s 4020s and 4060s. Just want to clarify one thing. Within the Panorama Web GUI, is there a way to set up that only a couple staff in the Central Operation Center able to access all devices while limit remote staff with only their local assigned device ? I know that the remote support staff always able to access their PAN directly. Thanks for your response. Leo

leole · ‎08-31-2010

Take a look at Monitor/traffic reports Denied Sources, Denied Destination, unknownTCP, UDP sessions Hope it helps. Leo

leole · ‎08-05-2010

Hello, It is new to me. After a software refresh on the PaloAlto, the list shows more than it used to . My Panorama currently is running 3.1.1 and I like to upgrade it to 3.1.3 We have PAN500 and PAN4000 boxes so i guess I have to down load 2 files, one for each type, correct? I got error when try to commit all and hope that the new updated software will fix it. Thanks Leo Le

leole · ‎06-16-2010

Actually, the 176.16.1.0/24 works for me. No need to modify.

leole · ‎03-31-2010

Hello group, Thought you would like to know. After further testing, we would like to clarify about the speed issue. Only the PA with ports set in VWire and it sat behind another firewall . The speed tests performed in front and behind one of our Production PA pairs showed that no performance degradation at all The Palo Alto support already took a look into this issue. Case number 00012949. Leo Le

leole · ‎03-30-2010

Hello group, We are in the process to set up and replace the current firewall with PA-4020 pairs . During pre-test, one thing came up. Using several Speed Test sites, the results are not what we expected, particularly the UPLOAD speeds are far off . It is a big HELP if the group let us know what are your Speed Test results comparing to the expected. Our set up is L3 ports with everything in AUTO with almost no rules for now, no User ID agents, Thanks in advance. Leo Le

leole · ‎03-10-2010

Hi jmck9999, I couldn't not find the H.323 but because of you, I searched and found h.323. Thanks for your help. Leo

leole · ‎03-10-2010

Hello, Here is the setup on Cisco ASA to let the Polycom's Teleconferencing works allow source: tcp / H323 destination any allow source any destination UDP 1718-1719, 3230-3247, TCP 1731, 3230-3235, h323 Please advise how to set it up in PAN OS 3.0.6 , model 4020. Thanks. Leo Le

Date Registered	‎01-26-2010 03:47 PM
Date Last Visited	‎08-07-2019 11:50 AM
Total Messages Posted	12
Total Likes Received	1

Online Status	Offline
Date Last Visited	‎08-07-2019 11:50 AM

About leole

Re: DELETE PANORAMA RULES

Re: SSL Weak CBC Mode Vulnerability

Re: IKE phase 2 failing with an asa5505

Re: IKE phase 2 failing with an asa5505

Panorama: is there a way to limit to device access within Web GUI

Allow Polycom's Teleconferencing

Re: DELETE PANORAMA RULES

Re: DELETE PANORAMA RULES

Re: SSL Weak CBC Mode Vulnerability

Re: IKE phase 2 failing with an asa5505

Re: IKE phase 2 failing with an asa5505

Panorama: is there a way to limit to device access within Web GUI

Re: How can I see what is being blocked?

Panorama software available in seperate hardware-related versions

Re: Getting SSL-VPN clients to see internal servers

Re: Speed Test through Palo Alto pair

Speed Test through Palo Alto pair

Re: Allow Polycom's Teleconferencing

Allow Polycom's Teleconferencing

Network Security

Cloud Security

Security Operations

About leole