About Satyam

Hi Guys, So we were using a router with two VLAN 10 and 20, connected to two different APs and everything was working fine. Today we purchased a firewall and we placed it before the router (refer to the image). I created two static routes 192.168.110.0 with Gateway 192.168.100.2 and 192.168.120.0 with the same Gateway. Still, we are not able to access the internet. Any idea what I am doing wrong? Any other way to configure this whole setup?       ... View more

I will configure 14 VLANs in total. I will connect all Firewall Interface to one of the L2 Switch and I will cascade the other L2 Switches with that L2 Switch. In this case, do we need Trunk? Please check if any problem with such configuration. There will be no L3 switch and the Firewall will do all the routing.   ... View more

    Hi Guys, I need help regarding access to the Web Server. Firstly, please refer to the image I have attached. Our company has 2 different sites. Site A has a Web Server with two different Websites hosted (let's say xxx.com and zzz.com) and our employees from site B connect to this web server. What we want is if User1 from SiteB connects to our Web Server then he should get xxx.com and if User2 connects he should get zzz.com. Is this possible only with Firewalls? If yes, Please guide how can I achieve this. ... View more

Hi Guys, I am extreme beginner on firewalls and network. I have a question, which will sound very naive. My brother company has around 500 employees in the same branch where he works. They have two firewalls in HA and then switches and then their servers. They run many web applications in their servers and a large amount of data is uploaded to the internal storages from internal endpoints. They have multiple 16G and 25G network cards in their server, storage, switches and firewalls and they have 3 ILL line 2x500 Mbps and 1x350 Mbps. My question is why do they need 25G interfaces in the firewalls? For servers, storage and swithes I can understand, since a lot of data is moved internally. But internal data can be routed through switches and their fastest ILL is 500Mbps. Since internal data dosen't need firewall to move around, so whats the use for 25G interfaces? Even most companies I have seen with fast ILL is 1Gbps, so shouldn't 1Gbps interface on firewall is enough, since data that come and goes through internet cannot be more than their ILL spped ? In general whats the use of firewall interfaces with higher gigabit speed than the ILL ? ... View more