About adiazm

Hello everyone.   I need to publish 2 webservers (192.168.23.10 and 192.168.23.11), both located inside my LAN (trusted zone) through 2 different public IP addresses (200.111.111.114 and 200.111.111.115). This is the configuration:   admin@PA-500# show network interface ethernet ethernet1/1 ethernet1/1 { layer3 { ipv6 { neighbor-discovery { router-advertisement { enable no; } } } ip { 200.111.111.114/28; 200.111.111.115/28; } interface-management-profile Ping-Only; } comment "Conectada a Level3"; lacp { port-priority 32768; } }   When I set these IP addresses in my ethernet interface ethernet1/1 and commit, I get this error:     In virtual-router default: address 200.111.111.115/28 on interface ethernet1/1 has overlapping subnet with address 200.111.111.114/28 on interface ethernet1/1.(Module: routed) Commit failed   How can I set this two ip addresses on the same interface?   thanks in advance and best regards! ... View more