About hklygre

We currently have only one portal (and one gateway), so trying another isn't an option.  However, it was suggested to me to try running a PAN-OS VM in AWS (Singapore), which might bypass some of the issues with the chinese firewall.  I'll see if I can try it this month. ... View more

Hi,   thanks, but so far, no luck. Wireshark (and zyxel config) reports IGMP v2, so that's what I've been using. Enabling IGMP on eth1/4 (or rather - creating an interface group on the vrouter) does not appear to give me anything more either.  If I add eth1/3 (internal/trust interface), I get some output from igmp statistics and memberships: admin@gw# run show routing multicast igmp membership VIRTUAL ROUTER:  default interface          group            source           up time      expiry       filter mode excl mode expiry v1 host timer v2 host timer last reporter ---------          -----            ------           -------      ------       ----------- ---------------- ------------- ------------- ------------- ethernet1/3        224.0.5.128      0.0.0.0          384.46       140.31       exclude     140.31           0.00          140.31        192.168.1.3 ethernet1/3        233.184.48.250   0.0.0.0          11.58        260.00       exclude     260.00           0.00          259.60        192.168.1.61 ethernet1/3        233.184.48.251   0.0.0.0          19.58        247.44       exclude     247.44           0.00          246.49        192.168.1.61 ethernet1/3        239.255.255.250  0.0.0.0          392.56       143.24       exclude     143.24           0.00          143.24        192.168.1.2 [edit] admin@gw# run show routing multicast igmp statistics VIRTUAL ROUTER:   default interface name:               ethernet1/3 total groups:                 4 total source-group pairs:     0 wrong version queries:        0 number of joins:              12 failed joins:                 0 general queries sent:         5 specific queries sent:        54 total received messages:      123 received v1 messages:         0 received v2 messages:         123 received v3 messages:         0 received invalid messages:    8 peak number of groups:        6 [edit] admin@gw# run show routing multicast igmp interface VIRTUAL ROUTER:  default interface          version querier          querier up   querier expiry robustness group limit source limit immediate leave ---------          ------- -------          ----------   -------------- ---------- ----------- ------------ --------------- ethernet1/3        2       192.168.1.1      414.09       0.00           2          0           0            no The Thomson IPTV PVR is a 192.168.1.61, and its membership changes whenever I change channels.  (In the output above, it is listed twice - that is just because I changed channels rapidly, so I guess an older membership didn't time out yet). However, I've tried doing the IGMP settings on eth1/4, eth1/3, a group with both 3 and 4, and two groups with 3 and 4 in each.  I have no idea about the other multicast settings - Rendezvous Point, PIM etc - I haven't touched anything else. admin@gw# show network virtual-router default multicast multicast {   enable yes;   interface-group {     "IPTV IGMP" {       pim {         enable no;         dr-priority 1;         bsr-border no;         assert-interval 177;         hello-interval 30;         join-prune-interval 60;       }       interface ethernet1/3;       igmp {         max-sources unlimited;         max-groups unlimited;         query-interval 125;         last-member-query-interval 1;         max-query-response-time 10;         router-alert-policing no;         enable yes;         version 2;         immediate-leave no;         robustness 2;       }     }   } } - Håvard ... View more