About breedend

I am trying to redistribute EIGRP routes from two AS numbers into OSPF so that my PA can learn the proper routes to the rest of the network, but I am running into a stumbling block since I only have one L3 interface connected to my internal network and the PA firewall will only allow a single OSPF area per interface.    The PA is at a remote, unmanned location so I don't have the option of configuring a second interface.  Is there a way I can still accomplish my goal without configuring another L3 interface?   Here are the details of what I am trying to accomplish.  I have two Cisco routers and a PA firewall connected on the same VLAN to a switch.  Router #1 has EIGRP 100 configured, which needs to be redistributed to OSPF for the PA to learn.  Router #2 has EIGRP 100 and EIGRP 101 configured.  The routes from both of these AS numbers need to be redistributed to OSPF for the PA to learn, but I do not want router #1 to learn about the routes from AS 101.  I had no problem configuring area 0 to create an OSPF neighbor with router #2 and to have the routes from AS 101 redistributed.  When I try to create a new area to distribute the routes from AS 100, the PA requires a different interface than the one used for area 0.    I'm using a PA3020 with PANOS 7.1. ... View more

While troubleshooting a user's inability to connect to GlobalProtect, I wanted to verify there were IPs available.  However, the IP pool did not appear under the DHCP servers.  How can I check to make sure there are IPs available within the IP pool that was assigned to the GP Gateway? ... View more

Is it possible to setup Global Protect to use Windows AD authentication for a subset of our VPN users, and Radius for the rest?  I'm assuming this is not possible since you can only set one Authentication Profile under the GlobalProtectPortal, but if there's a way to accomplish this I would love some input. Thank you. David ... View more

For PCI compliance, I need to submit poof of our firewall policy (we use a PA3020).  Is there a standard report that I can run that summarizes our Policies, or is there a way to export the policies to a PDF or spreadsheet?  On our old ASA I could simply do an export to HTML or spreadsheet which I could attach to my report. Thanks in advance. David ... View more