About bigtone

I am looking to do the same thing for 10-15 users, I don't have ldap for that many users so can I keep the users on the radius server?  I'm thinking of using freeradius with the google authenticator pam plugin...  any config documentation you can point me to? ... View more

We use an automatic configuration script but yes I have also tried putting in the ip address and port of the proxy server with the same proxy authentication error.  When I do a packet capture while trying to connect I see that the GP client tries to do an HTTP CONNECT to the ssl gateway on port 443.  I believe that is what my proxy doesn't like.  I think the proxy will allow http on port 80, but not 443.  When I manually type in my browser http://hostname:443 I get this The Proxy received an invalid response. URL: http://67.214.245.37:443/ In the packet capture I get an http 407 authentication required from my proxy...any other ideas. ... View more

thanks for the reply greg, I have notified support.  We tried the registry changes and we are still getting a "gateway x.x.x.x: proxy authentication failure." message.  Do you have any other suggestions for us? ... View more

I can console into the modem to issue the at commands using my pc's serial port, so that would suggest the serial port on the modem is working right?  I can also console in successfully to the firewall from my pc's serial port which tells me the rollover cable and connections are good as well right? The modem comes with a 2 headed cable, one with an rs232 connector and the other a db9.  I have tried using an rs232 gender changer to connect the modem to the console port of the firewall and that didn't work, I also did the same thing with a db9 gender changer to connect the db9 connector to the console port as well and still no success.  I have turned off compression as well with no success.  I know my modem is connecting to the firewall modem because it says "connected 9600" but won't respond to anything after that.  I can issue the +++ command to break out of it and that's it.  I may just have to break down and purchase a serial console server unless you guys have any other ideas? ... View more