About Shohei

Hi I Configured RAID with 120GB and 240GB HDD. Aftar that,booted up a device with single 240GB. It seem available diskc space is 120GB.a Device recognize inserted SSD is 240GB. Do you know resize SSD to 240GB? admin@PA-5020> show system disk-space Filesystem            Size  Used Avail Use% Mounted on/dev/md2              3.8G  1.2G  2.5G  33% //dev/md5              7.6G  613M  6.6G   9% /opt/pancfg/dev/md6              3.8G  1.2G  2.4G  34% /opt/panrepotmpfs                 1.8G   37M  1.7G   3% /dev/shm/dev/md8               88G  185M   83G   1% /opt/panlogs admin@PA-5020> show system raid detail Overall RAID status                        Good -------------------------------------------------------------------------------- Drive status    Disk id 1                            Present     (FTM24CT25H      )    Disk id 2                            Missing -------------------------------------------------------------------------------- Partition status panlogs                        clean, degraded   Drive id 1                      active sync maint                          clean, degraded   Drive id 1                      active sync sysroot0                      active, degraded   Drive id 1                      active sync sysroot1                       clean, degraded   Drive id 1                      active sync pancfg                         clean, degradedl   Drive id 1                      active sync panrepo                        clean, degraded   Drive id 1                      active sync swap                           clean, degraded   Drive id 1                      active sync regards, Shohei ... View more

Hi, I can not exit from VSYS. I tried "quit" ,"exit" and others command,but was not able to exit. Could you tell me it? Device:PA-2050(3.1.3) --------- admin@PA-2050 vsys2> set system setting target-vsys vsys2 Session target vsys changed to vsys2 admin@PA-2050 vsys2> --------- Thanks, Shohei ... View more