About jsuttor

Hello All, I was in the process of upgrading our firmware of our PA500 to 8.1 and when the device rebooted, it did not want to come back online.  Checked the startup and noticed I was getting this error message.  I did read online that it might be an issue with the hard drive?  Is there a way I can resolve this?  I cannot even get into maintenance mode to run a hard drive repair.   Entry: maint8935587 bytes read in 217 ms (39.3 MiB/s) Allocating memory for ELF segment: addr: 0xffffffff80100000 (adjusted to: 0x100000), size 0x74b2a0 Bootloader: Done loading app on coremask: 0x3 Starting cores: 0x3 Linux version 3.10.20-mp-7.1.0.0.22 (build@eng-bf0-1.paloaltonetworks.local) (gcc version 4.7.0 (Cav ium Inc. Version: SDK_BUILD build 41) ) #2 SMP Fri Feb 5 14:19:56 PST 2016 CVMSEG size: 2 cache lines (256 bytes) Cavium Inc. SDK-3.1 bootconsole [early0] enabled CPU revision is: 000d0708 (Cavium Octeon+) Checking for the multiply/shift bug... no. Checking for the daddiu bug... no. Determined physical RAM map: memory: 000000000b400000 @ 0000000000900000 (usable) memory: 0000000003c00000 @ 000000000c200000 (usable) memory: 0000000060000000 @ 0000000020000000 (usable) memory: 000000000f000000 @ 0000000410000000 (usable) memory: 0000000000615000 @ 0000000000100000 (usable) memory: 000000000005b000 @ 0000000000715000 (usable after init) ata1.00: exception Emask 0x0 SAct 0x7f000001 SErr 0x0 action 0x6 ata1.00: irq_stat 0x00020002, device error via SDB FIS ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/08:00:6d:20:b9/00:00:00:00:00/40 tag 0 ncq 4096 in res 6c/1e:00:00:00:00/00:00:00:00:6c/00 Emask 0x2 (HSM violation) ata1.00: status: { DRDY DF DRQ } ata1.00: error: { IDNF ABRT } ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/08:c0:35:20:b9/00:00:00:00:00/40 tag 24 ncq 4096 in res 41/40:00:35:20:b9/00:00:00:00:00/40 Emask 0x409 (media error) <F> ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/08:c8:3d:20:b9/00:00:00:00:00/40 tag 25 ncq 4096 in res 6d/1e:00:00:00:00/00:00:00:90:6d/00 Emask 0x2 (HSM violation) ata1.00: status: { DRDY DF DRQ ERR } ata1.00: error: { IDNF ABRT } ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/08:d0:45:20:b9/00:00:00:00:00/40 tag 26 ncq 4096 in res 6d/1e:00:00:00:00/00:00:00:a0:6d/00 Emask 0x2 (HSM violation) ata1.00: status: { DRDY DF DRQ ERR } ata1.00: error: { IDNF ABRT } ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/08:d8:4d:20:b9/00:00:00:00:00/40 tag 27 ncq 4096 in res 6d/1e:00:00:00:00/00:00:00:b0:6d/00 Emask 0x2 (HSM violation) ata1.00: status: { DRDY DF DRQ ERR } ata1.00: error: { IDNF ABRT } ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/08:e0:55:20:b9/00:00:00:00:00/40 tag 28 ncq 4096 in res 6d/1e:00:00:00:00/00:00:00:c0:6d/00 Emask 0x2 (HSM violation) ata1.00: status: { DRDY DF DRQ ERR } ata1.00: error: { IDNF ABRT } ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/08:e8:5d:20:b9/00:00:00:00:00/40 tag 29 ncq 4096 in res 6d/1e:00:00:00:00/00:00:00:d0:6d/00 Emask 0x2 (HSM violation) ata1.00: status: { DRDY DF DRQ ERR } ata1.00: error: { IDNF ABRT } ata1.00: failed command: READ FPDMA QUEUED ata1.00: cmd 60/08:f0:65:20:b9/00:00:00:00:00/40 tag 30 ncq 4096 in res 6d/1e:00:00:00:00/00:00:00:e0:6d/00 Emask 0x2 (HSM violation) ata1.00: status: { DRDY DF DRQ ERR } ata1.00: error: { IDNF ABRT } end_request: I/O error, dev sda, sector 12132405 JBD: Failed to read block at offset 11692 EXT3-fs (sda3): error loading journal EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (4) Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3)       ... View more