About BryanMay

BryanMay · ‎06-06-2022

Lychiang, thank you for the reply. We know we can add the "Admin Rules" manually. I was hope for an detailed explanation if this was a bug in Expedition that would cause this issue. We have several 5240's that are being migrated to from Checkpoint for this specific customer and are trying to ensure this goes as smoothly as possible without to many interruptions or manual add. Make sense?

BryanMay · ‎06-06-2022

Good afternoon We are working with a client on a Checkpoint to PA Migration (PanOS 10.2.1), when commit is applied we are getting an error that the tag on the rules are invalid. The configs were converted with Expedition v 1.2.21

BryanMay · ‎01-14-2020

All, I am working with a customer migrating from CP 2220 R80.10 to a PA820 PANOS 9.05. and am running into issues. I have followed the step 1-5 on exporting the settings from the CP and have imported them into Expedition, v1.1.51, after the import, the gui does not list the interfaces or the tunnels, which is going to be a huge undertaking to manually creating them on the PA820. I am able to open the json files and see the interfaces so they are in the exported config. any help would be appreciated Attached is a screenshot of what I see in the gui.

BryanMay · ‎10-08-2016

Thanks for the reply, thats the problem, I cannot pause the screen to enter the maint mode, how ever, I was able to get past the issue on the screen. had to change a setting in putty. regards Bryan

BryanMay · ‎10-07-2016

All, somehow I lost connection to my PA-200. Im trying to do a factory reset on it and I am not able to enter 'maint" during boot via console. I am using putty . When I try, it just keeps loading the kernal. is there a way to pause to enter "maint"? It will not go past this either regards Bryan

BryanMay · ‎09-25-2016

Hello Group, I am setting up a PA-200 in my SOHO with comcast as my ISP. I have comcast for my isp and am using DHCP to optain my IP address. My question is this. Per the setup guide, if I check DHCP under the IPV4 tab, and check, Automatically create default route pointing to default gateway provided by server. Am I to assume this will create a default VR, per the guide, there is a note that states : If the ISP provides a modem from which the configuration can be obtained automatically, set the Type as DHCP Client. Note: When "Automatically create default route pointing to default gateway provided by server" is enabled, a default route is installed in the virtual router, 'default'. If this is the case, It doe Not do this? I am currently on the current version 7.1.4h of the PANOS. I have no problem creating the VR, but I have no clue what my next hop would be from Comcast. Thoughts? thank you Bryan

BryanMay · ‎09-23-2016

Hi, I am migrating from blue coat web proxy appliances and will be using Palo url filtering. How do us the Palo as an explicit Proxy, as all end users have GPO based proxy settings. thank you

Member Since	‎08-23-2016 02:06 PM
Date Last Visited	‎08-15-2023 11:10 AM
Posts	9
Total Likes Received	1

Online Status	Offline
Date Last Visited	‎08-15-2023 11:10 AM

About BryanMay

Re: Checkpoint Tags missing from Conversion. Expedition v.1.2.21

Checkpoint Tags missing from Conversion. Expedition v.1.2.21

CheckPoint R80.10 Migration to PA 9.05

Re: Cannot enter "Maint" at boot via cli

Cannot enter "Maint" at boot via cli

Next Hop in default route using DHCP Comcast modem

How to Check if an Application Needs Explicitly Allowed Dependency Apps

CheckPoint R80.10 Migration to PA 9.05

Re: Checkpoint Tags missing from Conversion. Expedition v.1.2.21

Checkpoint Tags missing from Conversion. Expedition v.1.2.21

CheckPoint R80.10 Migration to PA 9.05

Re: Cannot enter "Maint" at boot via cli

Cannot enter "Maint" at boot via cli

Next Hop in default route using DHCP Comcast modem

How to Check if an Application Needs Explicitly Allowed Dependency Apps