Hey all, i got a question that im not sure how to solve. This is my setup/what i want to do do. I got a L3 internet line on Ethernet1 On eth2 i got a CAT2960L with vlans 10 and 20. On eth3 i got a CAT2960L with vlans 10 and 20. I got 2 2802i with mobility express and i want to use one as a WLC and the other to use that WLC. One AP will be in VLAN 10 and one in VLAN 20. I also want the vlans to be able to communicate with eachother, but still be different zones because of different internet rules ect. Is it possible for me to use the PA220 eth2 and 3 as "switch ports" and use the PA220 as router/DHCP server? If so, how is that done? Iv tried with sub-interfaces, but i cant seem to get inter vlan routing to work. Even if i override Intrazone fw rule. Iv created vlans 10 and 20 on the PA220, iv also set it up as a L2 interface, but that doesnt seem to work either. I seem to get issues with my viritual router, L2 and L3 doesnt mix, i understand why, but i dont know how to get around it. ANy suggestions are welcome! Im sure some of you guys have done similar stuff before. Best regards, Marius
... View more