About cperkins01

I was able to get this running. I did the follwing:   expedition@Expedition:~$ sudo apt-get update And I looked in the directory previously mentioned and found a zip: expedition@Expedition:~$ cd /var/www/html/OS/BPA/ expedition@Expedition:/var/www/html/OS/BPA$ ls best_practice_assessment_ngfw_pano-master.zip So I unzipped it: expedition@Expedition:/var/www/html/OS/BPA$ sudo unzip best_practice_assessment_ngfw_pano-master.zip Then cd to the directory and see the files: expedition@Expedition:/var/www/html/OS/BPA$ cd best_practice_assessment_ngfw_pano-master/ expedition@Expedition:/var/www/html/OS/BPA/best_practice_assessment_ngfw_pano-master$ ls best_practice_assessment_ngfw_pano Dockerfile.test pytest.ini requirements.txt test-requirements.txt build.sh MANIFEST.in README.md setup.py VERSION I read the README file and followed the "Clone method". Which is to use the pip command to install.  I ran the following commands:   expedition@Expedition:/var/www/html/OS/BPA/best_practice_assessment_ngfw_pano-master$ cat README.md pip install -r requirements.txt ### a message warned me that I needed to upgrade pip sudo pip install --upgrade pip sudo pip install -e . I went to the web UI and hit refresh and BAM! It worked.   I assumed this feature would be enabled by default, but I installed this in Fusion on my laptop and in the customer's environment after converting it with the VMware converter - both installs had the issue of not displaying BPA results after running the analysis.    I hope this helps.   Chris ... View more