Unable to communicate eth1/2 interface

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Unable to communicate eth1/2 interface

L0 Member

Hi Guys

 

I have come here with lot of hope , I am doing my masters project and for that purpose my topology .My goal here is to show how paloalto can block the threats with its inbuilt IDS IPS ,url filtering , block traffic etc but right now I am facing a issue setting up a network I configured ping management on the firewall also I configured the interfaces but the problem is my client is unable to ping the eth 1/2 interface can some one help me with the process and tell me where I am going wrong.

 

Client --- > Firewall --> Internet

1 REPLY 1

L4 Transporter

Which cloud? (Network) Security Groups or GCP firewall rules could certainly be in play.
 

Double check your route table on the firewall.  You should have 0/0 route pointing to the ETH1/1 subnet first IP address and a route for your vnet/vpc cidr sending the traffic back in through ETH1/2 interface.  If you have both interfaces set to DHCP and default settings, they both inherit a default route.  You need to disable it on the ETH1/2 interface.  

Do you see the traffic in Session Browser?

  • 2070 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!