Packet Flow in the AWS Gateway Load Balancer—Inbound

cancel
Showing results for 
Search instead for 
Did you mean: 
L0 Member
Did you find this article helpful? Yes No
No ratings

packet-flow-aws-load-inbound.jpg

 

With the introduction of the Gateway Load Balancer (GWLB) in mid-November 2020, AWS provided its customers with any port, load-balancing router. Prior to that, Azure and GCP were the only public clouds that had such a construct. Customers use these to provide a security layer that is scalable, resilient, and adaptable.

 

In the AWS implementation, endpoints are an integral part of the solution but are not a new concept in AWS. They connect elastic network interfaces (ENIs) to targets (e.g. GWLB) via "worm holes" in the fabric and and have been used with network load balancers (NLBs) for some time. These worm holes in the fabric bypass the usual routing constructs and can perforce result in some difficulty when troubleshooting. Here, we will trace the flow of a request originating from a client on the internet to a server in the AWS infrastructure. The infrastructure was deployed using the following TerraForm template:

 

Please download and view the entire PDF for instructions: Packet Flow in the AWS Gateway Load Balancer - Inbound.

Rate this article:
Register or Sign-in
Contributors
Article Dashboard
Version history
Last update:
‎07-08-2021 05:05 PM
Updated by: