Resolved! Public IP Behind PaloAlto

We have a /24 public IP network where some of the IPs will not NAT and some will NAT.  For the scenario were there will be no NAT, the host behind the PaloAlto will have a public IP assigned to the NIC.  Under what scenario would I break up the /24 i

Resolved! Is it possible to create reports or graphs displaying type and amount of transported data, sources and dests?

Where to start with this topic:

I can monitor the bandwith with SNMP and PRTG Network Monitor.

Now I'm interested in data >>>PA can provide <<< about types of data, sources and destinations?

I would like to check e.g. this:

How much VoIP is running throu

Resolved! Failure to Delete a Certificate

PA-200

PAN 6.01

I imported a certificate, but failed to do something correctly.  I wanted to delete the cert, and start over.  When I select the certificate 'ServicesVPN' and click Delete I'm told ...

   1- Failed to delete Certificate - ServicesVPN.

Resolved! FTP Server: No Allow policy but 3-Way-Handshake and Username prompt possible?

There is no allow policy from Untrust to DMZ to contact the FTP Server.

There is an deny policy instead as a last policy between ZONE Untrust und ZONE DMZ.

But if I try to connect to FTP Server a connection is estabilished and my FTP Server asks for a

Resolved! Could I use a Asian 2 bytes charset on CLI when I configure?

Hello

I tried to configure on CLI using 2bytes Asian charset as below.

As you see below when I configure 2bytes Asiasn charset to description column and then PAN showed error message is Server error : Malformed Request.

So I questioned weather PAN could

Resolved! URL Filtering Category is "Unknown"

guys,

i have a problem in our Palo alto 5050, it shows a lot of URL websites with Category "unknown", although it shows the right category type on bright cloud website,

any help ??,

Regards,

Resolved! Is there a global "enable SNMP" switch?

I'm trying to get some data about the amount of data on the interfaces.

Device/ Operations/ SNMP configured, SNMPV2 enabled.

SNMP on my Trust interface per IF Profile enabled.

I still can not get SNMP Data.

Roman

Resolved! Decryption Policy - Blocking things such as Facebook

We recently discovered that due to Facebook now being https:// that my users can get out to Facebook when using Internet Explorer.  This actually cause quite an issue due to a bug also getting in.

How do I configure the decryption policy to get in to