BGP RIB Out AS Path
I am using BGP between two ISP's. On one of them my AS number is listed one time by each prefix. On the other ISP my AS number is listed 6 times by each prefix. The ISP with 6 AS numbers is a lower preference.
Anyone know why?
I am using BGP between two ISP's. On one of them my AS number is listed one time by each prefix. On the other ISP my AS number is listed 6 times by each prefix. The ISP with 6 AS numbers is a lower preference.
Anyone know why?
I plan to update to PAN-OS 6.1.6 and GP 2.3.1.
Currently at 6.1.0, and 2.1.1.
Any suggestions or issues?
Thanks in advance
//moe
How to get the apps content update release notes of 8447-6897 ? Please help me
We had a site to sit VPN between on premise PAN going to AWS.
The tunnel was established and does not show any downtime but the issue we encounter is that when the Tunnel Monitor IP(169.254.2.x/30) and (169.254.3.x/30) is not pingable/unreachable PAN
Hi Team,
i have problem with ssl vpn palo alto detail in picture
acctually ssl vpn session is 0 detail below
what can i do?? Thanks
Hi, I'm currently doing DHCP server migration from Windows server's DHCP server function to Palo Alto PA-3200 series, with PAN-OS 9.1 series. I copied over all the configurations from Windows server to Palo Alto including the IP address reservation.
...
Hi, Palo-alto PA-VM-KVM-9.1.0.qcow2 is installed into GNS3 version 2.1.21 based on the below link. I try every configuration is same as the link. Two vCPU, 4G RAM and 8 interface. but after it start, it shows below message and then stop at the end of
...
Hi all, I have a IKEv2 IPSEC from PA to PA Firewall with tunnel monitoring enabled on one end. The tunnel suddenly went and the peer with no tunnel monitor is sending every 4 seconds a ikev2-send-p2-delete.
What could be the reasons behind this beha
...
Good day,
I need to uninstall Global Protect from bout 100 user devices.
We deploy and remove application using Microsoft Endpoint Manager (Intune).
I have created a script using this uninstall command:
This command reported that it ran successfully o
...
Hi,
We are having a weird issue in Palo. We have a FTP server and we can not access because Palo detects this vulnerability:
Name: SSH User Authentication Brute Force Attempt
Unique Threat ID: 40015
The Palo action is "alert" for this vulnerability but
...
I would like to have a miner to connect to the Pingdom API to pull a list of their US node addresses. The Pingdom API uses basic auth and requires an "app key".
Their documentation references two HTTP headers, authentication and app-key:
> GET /c...
Starting with PAN-OS 9.0 there is the ability to assign specific agent configurations based on software and app settings on GlobalProtect portal configuration.
It's possible to collect registry data from Windows endpoints under the new tab "Portal Dat
...
My company are going to migrate upgrade one firewall from 6.0 to 10.1.
And I found below KB points out the supported payload options above and below PANOS 7.0.
Several IKE/IPSec profiles are using aes128 for ESP encryption, is it aes128 equal to aes-12
...
I am working a customer issue where first 5 seconds on the calls is dead air. After 5 seconds, the call is normal. There is paloalto firewall. When we did packet capture on firewall, it was found that the RTP packet in capture on "drop" stage are dro
...Subject | Likes |
---|---|
4 Likes | |
4 Likes | |
3 Likes | |
3 Likes | |
2 Likes |
User | Likes Count |
---|---|
9 | |
7 | |
7 | |
5 | |
4 |