we are getting error: Disk quotas add up to more than 100% while committing any changes in panorama
Hi,
We have a PaloAlto firewall which is connected to a Cisco switch and on this Cisco swtich an AP is connected.
On the firewall I use ethernet 1/2 port to handle the free wifi clients. This port is in Layer 3 mode.
This port is connected with the Cisc
...
All the other locations worldwide are connected to central DC over IPSEC tunnels.
Most of the firewalls running at remote sit
...
Hello
We have an active/passive cluster (PA-820) which we use for IPSec tunnels (with 30 different partners).
One of the partners insisted on having a redundant connection using two IPSec tunnels with different peers. So we came up with the idea of en
...
I need to graph GlobalProtect current users + traffic via SNMP. I cannot find anything in SNMPwalk or in the available MIBs.
I looked through some older discussions but it seems there is no immediate answer. Any update?
Thanks
I'm looking at this document. https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClipCAC
It says our selected NAT addresses (2.2.2.0/24 on PA-2020 in this case) need to be routed to a tunnel interface, in order for policy lookup
Customer updated all devices to latest PANOS version after receiving the email for CVE-2021-3064. However, the PANOS versions for the devices are still showing the older version (8.1.6) in the customer support view. Customer can open each devices and
...
Hi Everyone
we got the problem for session end reason “threat”, cause we detected the coin miner traffic through firewall and transmission to internet, even we saw the session end reason already hit to threat when the spyware traffic initially and
...
hello
we have a customer with PA220 runing 8.1.8 and they want to upgrade to 10.0.8
I know 10.0 is supported on PA220 but is there any performance issue on PA220 for panOS 10.0.X LIKE slowness etc ?
Any guidelines if is it worth to upgrade to 10.0.X
...
We have taken over an account. I need to move 4 firewalls for our customer from their existing support portal into our support portal. Can someone give me directions here to get started.
-Mark
We want to prevent Globalprotect from connecting when user is on the internal network. We have the client set to manual connect/disconnect but users can be stupid and connect anyway.
We don't have an internal gateway, and dont want any ssl tunnel when
...
Hello
We have a issue with global protect:
when a user logs in to globlal protect from the outside it shows the LoginID correctly, but when the user logs in internally it does not show the UserID.
Any idea why this is happening?
Thank you very much.
B
...
Hello, community
Recently I've seen some object names with a line (check the attached image). Is there anyone that could help understand why this happening? What does it means?
Best Regards,
MrBraz
Hi Guys!
So I submitted my request to get my Palo-Alto 30 Day trial license.
I Got Approved & received an email from them with a download link. Now Once I try to download the VM I get the following error:
An error occurred while processing your reques
...
The hours in which events appear in the Paloalto log do not correspond to reality. They appear several hours after they have occurred.
We have checked that it is not a problem with the NTP, this seems to be a problem with the time at which Paloalto sh
reaper
on:
dynamic update failed
reaper
on:
eventid eq tunnel-status-up/down
reaper
on:
Problems accessing knowledge base
Raido_Rattameis
OtakarKlier
on:
Unable to ping website, getting this site can't be reached
