General Topics

Discover LIVEcommunity Through Our New Animated Explainer Video!

We’re thrilled to unveil a brand-new animated video that highlights everything LIVEcommunity has to offer!

This short and engaging video gives you a quick tour of the many resources available in our vibrant community — from interactive discussi

...

Netflow export into IPsec tunnel...

I'm trying to get netflow to export through a vpn tunnel on my PA-VM V9.1 firewall. My route and policy into the tunnel for the target collector is working because I can ping the collector through the tunnel. So I figure I need to change the default

...

Layer 2 to Layer 3 Connection , but on same Subnet and IP range?

We have a PaloAlto PA220 at work what is used for telephony/SIP traffic that I set up several months ago.

Upstream of the PaloAlto is a unmanaged L2 netgear switch what sits between the leased internet line, the PaloAlto , and a another non-Pa

...

Troubleshooting GlobalProtect disconnects

I have a couple of users that say their active connections are suddenly disconnected. What is the best way to determnine the cause of the disconnection? Again this is an active session not a time out

Resolved! ZPA Minemeld feed from json source truncated to last record

Problem Summary:

Trying to locally convey - as a feed - all subnet block ranges from https://ips.zscaler.net/zpa/json - but only getting the last presented.

URL Being referenced: https://ips.zscaler.net/zpa/json

Example Content:

{"Cloud Name":"zscale

...

Resolved! "SMB: User Password Brute Force Attempt detected" on share that is not being accessed

Recently I accessed a SMB share on a corporate Synology device (through the PA firewall). Accessing this share is hardly ever used. Now...days later, after several reboots of the client computer, the Firewall keeps on detecting the "vulnerability" SM

...

SSO authentication was solved through override, cause analysis request and Similars

Hi.

I have a website that I access via sso authentication, but I can't connect through the firewall.

After trying various things, I solved it through the override rule in the firewall

The override policy cannot be removed at this time.

I wonder why t

...

Resolved! Enable Qos on sub-interface

Hi all,

Can I configure Qos on sub-interface?

Model PA-5260

Software: 8.1.11

Thanks

Resolved! Captive Portal LDAP Authentication redundancy

Hello.

I have a Captive Portal that uses next Authentication Profile:

CP_Auth

Where:

Authentication Sequence:

CP_Auth - Auth_Mode_1, Auth_Mode_2

Authentication Profile:

Auth_Mode_1 - LDAP_1
Auth_Mode_2 - LDAP_2

LDAP Server Profile:

LDAP_1: 10.10.1.101, 10.10.

...

Resolved! Panorama IPsec tunnel to AWS

Need to create IPSec tunnel in Panorama hosted in Google Cloud that is managing our PAN-850 in customer datacenter to our cloud environment in AWS. FYI-we dont have Palo Alto in AWS.

Resolved! unsigned LDAP

Hi,

As we know Microsoft is going to disable use of unsigned LDAP port 389 in March 2020.

Fortunately I don't have LDAP profile on my PA firewall but I have Kerberos. Will there be any impact ? and do I have to change it ?

Thank you

Konrad

Resolved! CLI command for IPSEC tunnel info

Hello friends,

I am looking for cli command to see all the details related to ipsec tunnels configured on the gateway. I need information related to tunnel id, peer ip and their status. Is there any command available ? I can see details under gui but

...

SSL test pages of urlfiltering.paloaltonetworks.com not blocked

Hi,

If we test https://urlfiltering.paloaltonetworks.com/test-grayware there is no block page however if we test http://urlfiltering.paloaltonetworks.com/test-grayware we do get a block page.

I cannot find urlfiltering.paloaltonetworks.com nor *.paloa

...

Route between Subinterfaces with two VRs

Hello,

I have a network with two WAN connections, i have assigned one of them for a vlan 10 and the other for vlan 20 using two VR and NATing also i created dhcp server for both vlan and for now every thing works fine, the problem is i can't access t

...

How to remove one BGP-RIB Out

Hi,

We've configured BGP between Paloalto to Azure by using EBGP. The bgp is established but in RIB Out noticed that prefix 0.0.0.0/0 advertised to the peer respective azure.

How to remove this, because due to this the users in bgp unable to access

...

RADIUS Authentication Still Prompts for Password Change

I have a stand-alone system which is utilizing two Palo Alto 220 Firewalls. As part of this system, I have RADIUS policies configured on a Windows server to provide domain-admin access to the device. On one PA220 I am able to login with my domain cre

...