Mindmeld Whitelist Help (URL Filtering)

We have certain URL categories blocked with our PA firewalls. However, we need to setup a whitelist so we can unblock specific URLs  that are in a blocked category. We want to use Mindmeld.

Does anyone have good directions how to set up a whitelist

EBL size limit - sorting output feed

I'm using a minemeld server to generate an external dynamic list for a PA-5220 runing version 8.1.4.  The dynamic URL list exceeds the 50,000 entry limit.

I've seen other posts recommending to use URL parameters to limit the list to the first 50,00

General troubleshooting for Office 365

I have set up the feeds, and the EDLs and added the EDLs into a policy.

Whenk I run the command in the CLI "request system external-list show type url name o365-URLs", I retrieve the list in the PA firewall, and the list there matches the list in

Updating MineMeld

Hi Guys

I am running 0.9.48 and want to get to 0.9.50+ to utilise the latest Office365 feeds.  I have checked the old method and I don't have the auto update utility installed 

 If it try this method as suggested

Custom search filters for Anomali

Hello,

Is it possible to configure the Anomali miner to allow for custom queries? For example, in threatstream, I like to search for the following string in Analyze -> Observables. How can I configure the anomali.opticAPI miner to allow for this?

Minemeld installation errors on ubuntu 16.04

Hi,

I'm trying to setup a new installation of Minemeld using the cloud installer and am seeing the following errors. it appears the Minemeld install never completes. I'm not well versed in ubuntu so any help is appreciated.

The following packages

Traffic Monitor Operators

Hey!

is there a way to define a "not equal" operator for an ip address?

Why does "neq" not work?

Failover Link Monitoring too long

Hello guys,

I have 2 plao alto configured with HA Active/passive mode.

On both firewall, I configured link monitoring on link group with ethernet 1/11 and ethernet1/13 that are aggregated on Ae1 with condition "ALL". Those interfaces are plugged to a

Issue passing traffic thru PA 500

Hello I'm not very proficent in configuring PA and been trying for 3 weeksto do it. So now I figure I ask for help and learn something in the process. So my network layout: I have a Cisco ASA that is pointed towards the internet and is doing NAT/PAT