General Topics

Discover LIVEcommunity Through Our New Animated Explainer Video!

We’re thrilled to unveil a brand-new animated video that highlights everything LIVEcommunity has to offer!

This short and engaging video gives you a quick tour of the many resources available in our vibrant community — from interactive discussi

...

Resolved! tcpdump filters

Does anyone know what filters are supported for the tcpdump command on PAN-OS (7.0) ?
For troubelshooting of a Syslog (server) issue, due to large amounts of traffic, I need to capture only packets with syn- or fin/rst-flag set.
Something like this : #

...

Statics for DoS Protection

Since DoS protection is for more granular protection of a server, how can i see the statics for the particular server i want to protect. Wouldn't we need to know the pps statics and sessions for that particular server.

Resolved! Newbie - GP and NAT

1) this is for a home use environment.

2) I have successfully configured Global Protect to work external.

3) I have PLex running and need to get it communicating to the world. Was able to do this before GP by setting "Service" to "any" in the NAT ru

...

Static NAT between virtual routers

Hi,

I'm going to migrate a Juniper SRX firewall with a Palo Alto VM-500 firewall.

The case: The Juniper firewall is configured with multiple virtual routers. Between this routers we can static NAT subnets. As showed in the picture below, we have 2 vir

...

Resolved! Forum Location for Education institutes

Greetigns

Is there a section of the forum where people involved with education Institutions.

I want to get some idea of how and what people allow when dealing with Children in a school when the age ranges from 8 years old up to 17 years old. as well

...

Log percentage and space

If logging is set to allow up to 95% space on the disk and it hits 95% that same partition,/dev/md6 3.8G 3.2G 454M 88% /opt/panrepo - PAN-OS Image repository.(Device/Software), resides the PAN OS what happens when you hit 95% on logs and try to

...

Resolved! Wrong IP calculation after Whitelisting on MineMeld

Hi,

I have installed MineMeld and it works fine. Before creating our configuration I wanted to test something on Whitelisting as it is going to help on what we are aiming to do with MineMeld. I hope the below finding is a configuration mistake o

...

Intrazone Rules

Hey guys,

I took over a Palo Alto Firewall and I noticed that there is a intrazone allow rule at the end for every single internal zone.

So source zone: internal zone xy

source address: any

destination zone: internal zone xy

dest address: any

application:

...

Resolved! Remove object tag via CLI?

Static tagging via CLI is pretty straight forward, but how to remove a static tag via CLI?

Resolved! When to use ZoneProfile and DoS Profile

Hello All - Can i understand that Zone Protection Profile is to Protect Firewall itself and DoS Protection Profile is to protect the servers and hosts behind the firewall from Internet?

Can i achieve a DoS protection (For example SYN Flood attack) onl

...

"Install media mount failed" when trying to create bootstrap USB

I am attempting to create a bootstrap USB on a PA-200. The Palo site provides pretty good procedure documentation, but not much for troubleshooting. I have managed to create the bootstrap.tar.gz file and upload it to a PA-200 running Pan-OS 8.0.3. I

...