Resolved! custom report - "unknown" category
Hello
I observed that in my reports in pdf I have a lot of "unknown" in CATEGORY column.
My report looks like:
How is possible that google-base or linkedin-base have category=unknown ?
Regards
Slawek
Hello
I observed that in my reports in pdf I have a lot of "unknown" in CATEGORY column.
My report looks like:
How is possible that google-base or linkedin-base have category=unknown ?
Regards
Slawek
Hi,
Hello,
We are having a annoying issue :S We have configured a tunnel routed-based between PA (7.0.6) to Microsof azure. The tunnel is up but we are detecting several problems.
1) The transfer speeds are very low, fluctuate and are nothing stable
...
Hi,
My URL filtering response pages never appear, even the default ones.
Is there anything to do to activate them ? I always have the "This site can’t be reached" message with a connection reset.
Thanks
HI All,
I have used the below link to configure Syslog miner, but metrics are not showing up in stats.
https://live.paloaltonetworks.com/t5/MineMeld-Articles/Using-the-syslog-Miner/ta-p/77262
I have tried to troubleshoot using following discussi
...
Good Morning. Is there an easy way to clear out all configuration settings on a new Palo without having to go through the CLI to clear each item individually, or doing the same in the GUI? It is time-consuming to have to go in and delete the default
...
PA-3020 Software Version 8.0.4
I have several policies U-Turn Nat and Destination Address Translation in the DMZ
Three times a day the acces to these Policies becomes very slow
If I send a ping to one of these servers the time is very large the 1000 to
Hi all,
today i found my PA-VM-300 in maintenance mode, refusing to boot.
Maitenance Entry Reason:
Cryptod failure. Caused by: Master key expired.
This firewall is a backup of our production firewall, in our Disaster Recovery Plan, in addition to VMwar
Hi all,
I hope someone already did something like that to answer my question
We have a virtual Panorama on PAN-OS 8 with a local log collector. On this panorama we manage differdnt firewalls and also store the logs of these firewalls. This panorama
...
Dear valued Palo Alto Networks customers,
If you are using a static username and password to log in to Aperture, please read the following update carefully:
As of August 24th, 2017, to further strengthen your security posture, Aperture now supports m
...
Hi,
When attempting to modify the interzone-default policy rule as per the manual…
The process fails at Step 3 when I click OK with the following error
We are running 8.0.4.
Has anyone seen this error before?
Hello Communitys Members,
I´ve made an upgrade of our PA-3020 from PAN OS 8.0.2 to 8.0.4. We have a web proxy appliance placed in DMZ. From there the proxy connects to our internal DCs to get group memebership etc. from active directory and to authen
...
We have a remote site connected behind ISP router and Meraki receives 192.168.X.X IP from it, and all networks locally are connected further to Meraki. The main site has public IP directly on the firewall. Not sure how to make configuration work.
We are having issues getting our information from our PaloAlto 5020's. It looks like it is sending but we do not have any chartable information on either of our netflow servers. We are using Solarwinds Netflow Traffic Analyzer as well as What's up
...Subject | Likes |
---|---|
4 Likes | |
3 Likes | |
3 Likes | |
3 Likes | |
2 Likes |
User | Likes Count |
---|---|
14 | |
12 | |
8 | |
7 | |
6 |