Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
04-29-2024 12:39 AM
Hi Team,
We run the command eventid eq tunnel-status-up / down but we dont see any output under Monitor>system. What is the reason? two days back we see the went down and see the DPD log as well but still no result for subjected command please suggest.
04-29-2024 03:06 AM
this log entry is generated for tunnel monitoring, so if you don't see this logs when a tunnel goes down i'm assuming you didn't configure tunnel monitor
Tunnel monitoring can be enabled by going to Network > IPSec Tunnels > tunnel > advanced settings > tunnel monitor
add a destination IP and monitor profile
commit
DPD has it's own logs and does not use the "tunnel-status-up / down" logs
04-29-2024 03:06 AM
this log entry is generated for tunnel monitoring, so if you don't see this logs when a tunnel goes down i'm assuming you didn't configure tunnel monitor
Tunnel monitoring can be enabled by going to Network > IPSec Tunnels > tunnel > advanced settings > tunnel monitor
add a destination IP and monitor profile
commit
DPD has it's own logs and does not use the "tunnel-status-up / down" logs
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
