Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Link Aggregation to Cisco Switch

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Link Aggregation to Cisco Switch

L1 Bithead

How would I go about creating a link aggregation from a Cisco Cat4500-series switch to a PA-5020?  I'm shooting for having multiple links between the two devices for redundancy (and load-balancing too, if possible).

What would I have to do on the Cisco side of the aggregated link?  What about the PA-5020 side of the link?

1 accepted solution

Accepted Solutions

L2 Linker

You would configure the interfaces on the Cisco in an Cisco EtherChannel group.

Here is a great article on that:

http://www.ciscozine.com/2008/11/04/configuring-link-aggregation-with-etherchannel/

Next you would set up the corresponding interfaces on the Palo as a Aggregate Interface Group.

The details on how to do that can be found on page 98 & 99 of the PA-4.1_Administrators_Guide.pdf

Cisco best practice is to use an even number of interfaces... ei: 2 or 4 or 6 or 8 1000Mbps ports.

If you have SmartNet support on the Cat4500, Cisco TAC should be able to help you set it up no problem.

View solution in original post

1 REPLY 1

L2 Linker

You would configure the interfaces on the Cisco in an Cisco EtherChannel group.

Here is a great article on that:

http://www.ciscozine.com/2008/11/04/configuring-link-aggregation-with-etherchannel/

Next you would set up the corresponding interfaces on the Palo as a Aggregate Interface Group.

The details on how to do that can be found on page 98 & 99 of the PA-4.1_Administrators_Guide.pdf

Cisco best practice is to use an even number of interfaces... ei: 2 or 4 or 6 or 8 1000Mbps ports.

If you have SmartNet support on the Cat4500, Cisco TAC should be able to help you set it up no problem.

  • 1 accepted solution
  • 4416 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!