M365 slowness via Prisma
Hi Team,
We are facing issues with the M365 via prisma. If we bypass prisma it feels better to access. If it is via Prisma it is pretty slow. Any suggestions on how to troubleshoot this issue.
Regards,
Sanjay S
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
Hi Team,
We are facing issues with the M365 via prisma. If we bypass prisma it feels better to access. If it is via Prisma it is pretty slow. Any suggestions on how to troubleshoot this issue.
Regards,
Sanjay S
Hi Everyone
We recently implemented Advanced URL filtering at our University, one of the categories we have blocked is Newly-Registered-Domains, we created a custom URL group and implemented dynamic lists for the infosec team to add exceptions and
...
Hello Guys,
I have a project to replace palo alto with another two palos they are configured as HA and i want to get all the cli commands in one go and past it into the new firewalls ? will that work?
who knows what is the command that we could do
...
The user was trying to access the Proofpoint links it is not accessible in the firewall. We could see the action is reset both in monitoring and a session end reason is policy-deny and checked the threat logs but we couldn't see any logs in the threa
...
Hi team,
While configuring PanOS SD-WAN, I successfully added the firewalls as managed devices to Panorama and installed the SD-WAN plugin version 3.1.2. Subsequently, I included the devices in the SD-WAN configuration, activated BGP policy for autom
...
The customer found that some traffic logs have extremely large bytes, reaching 281.5T,
Looking at the log details, it was found that:
Question 1:
Details:
Type end
Bytes 281474976579754 ---- I think this is an incorrect display?
Bytes Received
...
When you want to allow the linkedin-base application with a specific Security Policy Rule, for example Linkedin-Rule, the Implicit applications it depends to are automatically allowed by the firewall, this means that the Security Policy Rule Linkedin
...
An IT Auditor stated that SNMP is listening through the firewall for a specific Public IP Address.
I have been filtering the network traffic on the PaloAlto 3020 for that specific IP address and also filtering with port 161. BUt Id not see any res
...
Good Morning!
I am not seeing any network activity in the ACC tab for my 450. I've cleared all filters just in case, restarted the management plane, I even failed over to see if it was isolated to the one unit. Both are showing this. When I set the
...
Hey everyone!
So, we've recently made the switch from Checkpoint firewalls to Palo Alto ones, and we're still ironing out some kinks in the setup. Right now, we're focusing on setting up app control rules and such.
But here's the thing: we've hit a
...
Hi all,
I will upgrade the PA-3200 from pan OS 10.1.9 to 10.2.7-h3, do I need a base image of 10.2.0 for the upgrade process?
because i don't see documentation for the upgrading to 10.2.0
Thanks
Hi Community,
Have configured EDL IP & Domain's list. Test source URL is accessible but its not showing any entries in the list.
In IP list it showing only 0.0.0.0/32 but actual list is not showing.
Please advise.
Pan OS version: 10.2.7
Forgive my lack of knowledge but we have a PA-5410 running 10.2.4-h4. I was curious with 11.1 being out know if I should upgrade or stay on 10.2?
Hi !,
Just want to be sure please, The study guide page 181 mention that to use data port for HA1 link and management port as HA1 backup but it's not what is written in the technical doc... HA1 on Mgt port for PA without dedicated port and a data por
...
All
I plan to secure web interface for management of PANFW. we use data plane IP to manage all FWs. Is there way to deploy certs to each PAN via Panorama or it has to be done one by one. If any one did this before Please help and share
Thank you
...Subject | Likes |
---|---|
1 Like | |
1 Like | |
1 Like | |
1 Like | |
1 Like |