Not able to login into URL from behind the palo alto

Dear Team,

Greeting...!

We are trying to access one URL from behind the palo alto, it was accessible but we are not able to log in to that URL, and when we checked using a mobile hotspot it was login successfully.

Additionally, we checked the t

Need clarification on URL Filtering logs

Hi everyone,

Please help me get through this.

We have configured PA-450 firewall and everything is working fine as expected.
But, We have used the option URL category in the security policy without an URL filtering profile for all user group. Which is

10.2.8 DP DP Hardware Packet Buffer exhaustion bug

If upgrading to 10.2.8, keep an eye out on your DP Hardware Packet Buffer usage. We've seen it cause PA-5250's to stop processing traffic.

TAC is aware of the issue. We ended up downgrading to 10.2.7-h3 to work around the issue for now (be mindful of

Layer 2 network extension

Is it possible to extend the layer 2 network over the layer 3 network to the other site using Palo Alto

Basically I am trying to extend the VLAN to other site. Not sure if this can be achieved with Palo Alto. Any suggestion are welcome

Running 11.1.2 in production

Hi everyone

I read that 11.1.2 is now the preferred release for 34xx, and desiring to upgrade due to some of the new features, I find myself concerned about this known issue:

PAN-224763 - A TDB engine version mismatch issue affecting all firewalls,

NIPS

How do we identify NIPS logs among Paloalto Firewall logs ?

Firewalls communicating to public IPs on Management Interface

We are currently seeing the Management Plane of our Palo Alto Firewalls communicating to the following IP-Addresses:

• 34.96.84.34
• 107.178.249.217
• 35.238.108.32 

This communication occurs on different Platforms. We see more activity since PAN-OS 10, curr

AWS-Palo VPN Phase-2 Rekeying

HI Team

We have an issue with AWS Site to Site VPN, where we can see continuous rekeying of Phase-2 tunnels. It's a PA-3220 HA pair. It started happening recently as we can see previously the rekey did happen only after the Lifetime expired (Phase-

Can't use existing 'Object Group' in new Policies on 11.1.2

I'm converting from ASA to the PA 3410 running 11.1.2 code.
I am frustrated by the fact that every time I write a new policy/rule, I cannot use an already established 'Object Group' as the code forces me to make yet another new "Obj Group' even if it

User-ID Redistribution Agent : Close Connection to Agent

I am getting high severity alerts for user id connection agent Failure - Redistribution Agent <Agent Name> (Vsys1):Close Connection to Agent. Would appreciate if anyone can help me understand the log to check if the issue occurred due to firewall or

Need to upgrade PA 440 Firewall

I need to upgrade PA 440 from the software version 10.1.6-h6 to version 10.2.8 can you please provide me the plan.

Palo Alto PA 5220 running on 10.1.10 H2 is not mounting /dev/sd9 partition

When we booted up the firewall we're getting an error that AutoCommit failed to complete. This was seen while mounting the raid partitions, specifically /dev/sd9. After referring the documentation existing on Palo Alto community, in the link https://