11-13-2023 04:19 AM - edited 11-13-2023 06:30 AM
Hello,
I have the management interface of some PAs in the 10.10.10.0/24 management network. This is the a corporate management network for network devices etc. I also want to inspect traffic on this network and have assigned a interface/security zone with the default gateway for the management network on the PAs. I am having trouble getting the routing to work inband vs default management route. the fib takes traffic destined for the network devices and sends down the management interface. I have included a simple network diagram.Any ideas on how to accomplish this?
Thank you
11-13-2023 08:50 AM
That doesn't seem possible since the management interface isn't bound to a virtual router and e1.10 should be.
Can you provide output on the mgmt interface configuration and the routing table output that shows the traffic flow?
11-13-2023 08:50 AM
That doesn't seem possible since the management interface isn't bound to a virtual router and e1.10 should be.
Can you provide output on the mgmt interface configuration and the routing table output that shows the traffic flow?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
