AWS VM-Series Virtual Bundle1 Health Check issue with Gateway Load Balancer

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

AWS VM-Series Virtual Bundle1 Health Check issue with Gateway Load Balancer

L1 Bithead

I am following the video https://www.youtube.com/watch?v=c28ZwlhCIWE

to implement a Centralized design using Bundle1. However, I am getting health check issue for the GWLB.

I capture packets on the firewall and can see packet from the GWLB (10.100.0.94) to the FW (10.100.0.89). but no response.

KimSiah_0-1685934698777.png

Target group always time out to get a response. 

I have the src/dest check on the 2 ENI of the firewall instance disabled.

The health check is TCP on port 80. I have tried http to "/unauth/php/health.ph" as well

I have a profile while allow http https attached to the Eth1/1

KimSiah_1-1685935127996.png

 

Please advise. Thanks.

 

KimS

 

 

 

 

1 accepted solution

Accepted Solutions

L1 Bithead

Found the problem. Missing a security zone setting for the Eth1/1. seem like the video didnt mention that. 

 

View solution in original post

1 REPLY 1

L1 Bithead

Found the problem. Missing a security zone setting for the Eth1/1. seem like the video didnt mention that. 

 

  • 1 accepted solution
  • 1136 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!