Hello,
Is there planned AWS Transit Gateway integration? There is mention but no detail in this video:
https://www.youtube.com/watch?v=6fhwoAwYrug
Other than operational ease, the Transit Gateway advantages appear limited. Traffic between VPCs is not
...
Hello to all,
I am doing a lab in Azure with a VM-300. I have the three interfaces - trust, management, and untrust. I have this model working to protect 2 additional subnets that have VMs, I achieved east-west and north south protection, including
...
Hello,
I've configured up two interfaces on my PA-VM (management 10.0.64.3 with VMnet0 - 10.0.64.0/24 and data with VMnet1 - 10.0.0.0/16). Management is directly connected to PC with Windows and Ethernet 1/1 to FastEthernet0/0 on my switch. I've confi
...
Hello,
I'm using PA-VM with PAN-OS 9.0.4 on GNS3 2.2.5. I've configured four VMnets (0 - management, 1 - LAN_IT, 2 - LAN_USERS and 3 - SERVERS). I've access to management on IP address 10.0.64.3 on Eth0 port. I can't configure traffic ports e.g. e1/1,
...
Has your company gone fully cloud native? Are you just starting out? Somewhere in between? We're interested to learn what blockers you've experienced, and what sort of solutions you've found in your journey—from a security side or dev side.
The documentation seems a bit light on detail. I have created a Service Principle in Azure and entered the data into my two firewalls as per these documents:
https://docs.paloaltonetworks.com/vm-series/9-1/vm-series-deployment/set-up-the-vm-series-fir
...
Hello, currently doing a POC for Transit VPC setup in AWS with VM-Series firewalls and noticed that default route is not propagated on subscriber VPC routing tables. All the other subnets are propagating. Followed https://www.paloaltonetworks.com/re
...
In AWS environment we have containers that do the job and then terminate. How is is possible to do a security policy on containers? DAG is not detecting the IP Address used by container to egress out to internet.
Secondly, how a single IP Address can
...
Hello,
We are in the process of bootstrapping our ELA-licensed VM-series firewalls for use in Azure. The firewalls will not have internet access once spun up, so I am not able to simply load the auth code in the license folder. We will be leveraging
...
Ok Gurus, I got a need for some help and visibility on this one... please...
My FWs are virtualized within a open source (KVM) environment, that was placed into GCP back in June 2019.
Somewhere along this week, when I first noticed that I am not ge
...
I'm just wondering if anyone setup a DMZ on Transit firewalls in Transit VPC on AWS? Basically we need to have outbound to inbound NAT rule with a elastic ip address. Came across this link but not sure if this is the proper way of doing it. We would
...
I'm running a trial of the AWS PA-VM product, and am not getting any statistics logged:
Logging statistics
------------------------------ -----------
Log incoming rate: 0/sec
Log written rate: 0/sec
Corrupted packets: 0
Corrupted URL packets: 0
Corrupted H
Hello, We have recently setup two Palo Altos in Transit VPC on AWS but I'm unable to add them to a on prem panorama. The status of both devices on Panorama shows disconnected. VM-Series plugins are installed on both firewalls and Panorama. Am I missi
...
I see that we have SR-IOV and DPDK modes supported for Palo Alto in AWS and understand that DPDK is proffered mode which provides fast processing, so are there any specific situation where SR-IOV mode is preferred over DPDK?
I am trying to setup Azue site to site VPN with BGP. IPsec tunnel came up successfully and I can ping from PA BGP Peer IP to Azure BGP peer IP. However, BGP session can not be established. It gets stuck in connect state. I have been reseraching Azure
...
reaper
on:
Core content from the show running resource-monitor command on a VM series firewall
