Monitoring "Panorama Connected" over SNMP is always connected

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Monitoring "Panorama Connected" over SNMP is always connected

L0 Member

Hi there

 

We would like to monitor the status of "Panorama Connected" of a PA-440.

I found the the correct SNMP Get OID for this case.

 

But when we enter a wrong Panorama IP, the OID String is still "connected":


27.02.2024 10:32:36 (7 ms) : Device: fwp*.om*.local
27.02.2024 10:32:36 (10 ms) : SNMP v3
27.02.2024 10:32:36 (12 ms) : Custom OID 1.3.6.1.4.1.25461.2.1.2.4.1.0
27.02.2024 10:32:36 (86 ms) : SNMP Datatype: ASN_OCTET_STR
27.02.2024 10:32:36 (89 ms) : -------
27.02.2024 10:32:36 (92 ms) : Value: Connected
27.02.2024 10:32:36 (94 ms) : Done

 

Can anyone reproduce this issue?

 

Thank you Simon

0 REPLIES 0
  • 334 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!