- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Hello everyone, I’m new to palo alto and I have the following problematic that I couldn’t solve.
I have PA Firewall in my local site and it’s configured to allow site to site connection to a remote branch which works perfectly. In addition, I’ve set up client to site (to local site) connection and it works perfectly, I can reach all the resources in my local network. (The document attached is a summary for the environment).
However, I can’t reach the remote site from the client vpn. I tried adding some routing rules but honestly, I can’t tell what the issue could be.
Please let me know if you have any thoughts or guidelines to follow.
Check the following things and it may help:
1. Is the return route added on the Remote Site VPN end for your Client VPN IP subnet range
2. Is your GP VPN configured in Split/Full tunnel mode. If split tunnel add the remote IP address range on the include route on the GP config
3. Check whether the security policies are in place and also if any proxy id configured add the client IP range also on the IPSec tunnel
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!