04-28-2020 09:11 PM
I've been seeing alot of Code Executions on Palo Alto Threat logs, most of them are not applicable on our servers and had an action of "Reset-both". Did the Firewall completely blocked the connection or there's a connection happened but did not complete since both server and client had a RST.
Also same on application based, there's a lot of "Reset-both" teamviewer connections on my logs, is it advisable to completely blocked it so it won't appear on my firewall logs?
04-29-2020 12:57 AM
The 'reset-*' action will inject a RST packet into the tcp stream, breaking the connection.
So a connection exists, a threat is detected and blocked, and a RST is sent to end the session
05-08-2020 12:21 PM
So in this case PA sends the reset connection to both pc and server at same time right?
05-08-2020 12:26 PM
for reset-both yes
RST is sent to client and server at the same time
05-08-2020 12:29 PM
Many Thanks Reaper need to learn lot from you.
05-08-2020 12:37 PM
That can be arranged 😉
02-27-2023 06:26 AM
Question trying to resolve a logging issue we are using thresholds to block-ip source our Qradar instance is not seeing the block-ip logs all logging function are functioning properly from our Pano. I was going to turn on log at session start and also considering changing it to see if reset-both would show up. Any thoughts or explanations would be helpful thanks.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!