Update steps RMA Replacement Firewall for case 2: Old device is still connected to the network and firewall is managed from panorama:

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Update steps RMA Replacement Firewall for case 2: Old device is still connected to the network and firewall is managed from panorama:

L2 Linker

The following KB missing steps for version 10.1 as authentication key had introduce for this version onward

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Clkn

VLim_1-1681815155847.png

 

Based on case 2 : 
if follow the steps provided the replaced firewall doesnt appear on the manage device and notice managed device is in disconnect state.

 

Tshoot steps as following KB
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u000000wkjSCAQ&lang=en_US%E2%80%A...

 

Based on the above KB it require generate authentication key

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u000000wkjSCAQ&lang=en_US%E2%80%A...


So what should be done is follow this KB steps 2 only
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u000000wkjSCAQ&lang=en_US%E2%80%A...

 

and go to Managed Firewall -> Panorama setting -> Enter the new auth  key -> Commit

 

Back to Panorama the replaced firewall still wont appear, open a new browser in private mode and login to panorama again then the new replace firewall shown in managed.

0 REPLIES 0
  • 789 Views
  • 0 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!