Hi Reaper, Thank you for the answer. The problem is that I want to add a netflow profile on the VM firewall´s virtual wire subinterfaces. Please consider the following: " Use template stacks to configure the settings that are required for the VMSeries firewalls to operate on the network and associate; the configuration is defined using the Device and Network tabs on Panorama. And each template stack with zones used in your NSX configuration on Panorama must be associated with a service definition; at a minimum, you must create a zone within the template stack so that the NSX Manager can redirect traffic to the VM-Series firewall. Each virtual wire zone belonging to the NSX-related template becomes available as a service profile on the Service Composer on the NSX Manager. When you create NSX-related zone on Panorama, Panorama pushes the zone as a part of the template stack configuration to the firewall, and the firewall automatically creates a pair of virtual wire subinterfaces, for example ethernet1/1.3 and ethernet 1/2.3, to isolate traffic for a tenant or sub-tenant. On the firewall, you can then Create Security Groups and Steering Rules to secure traffic that arrives on the virtual wire subinterface pair that maps to the zone " So I´d like to add a netflow profile to those ethernet1/1.3 and ethernet1/2.3 on the VM firewall. Is this possible to achieve from the Panorama? Thank you, Marcos.
... View more
