expedition 1.1.103: migration PA5050 to PA3260; not migrating ethernet1/1ðernet1/8 not migrating from virtual wire type to layer 2 or layer 3

cancel
Showing results for 
Search instead for 
Did you mean: 

expedition 1.1.103: migration PA5050 to PA3260; not migrating ethernet1/1&ethernet1/8 not migrating from virtual wire type to layer 2 or layer 3

L1 Bithead

Installed expedition 1.1.103.

Trying to migrate from old PA5050 of 8.1.0 to PA3260 of 8.1.0. After import and loading to PA3260 I found that default interface of PA3260 ie ethernet 1/1 and ethernet 1/2  of virtual wire type never convert to layer 2 and layer 3 type and the ip address configuraiton never assigned to it because of it.

 

I think its a bug.

Or Am I doing any mistake? from my side

 

1 REPLY 1

L5 Sessionator

@Jahesh For PA to PA migration, I suggest you export the config from the old PA as xml file ad directly load it onto the new PA. You do not need Expedition in this use case.  If you encounter any issues, please open a TAC case with the support. 

 

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!