BGP route map

Showing results for 
Show  only  | Search instead for 
Did you mean: 

BGP route map

L0 Member



Here is a simple use case.


I have 3 palo, on 3 DC, and for each DC i have a router from on ISP with one single /28 public IP network.


One computer can move from one DC to one DC. For exposed server, behind a NAT, i am trying to advertise using BGP the ISP to use PADC1, PADC2 or PADC3 as the next hope router.


My problem is BGP prefixes for exposed servers received in my Palo alto infrastructure  are private /32 ip.


Based on this documentation ( i can set the public /32 ip for each private /32 ip in my prefixes with a BGP route-map, but it is not working. ISP receive the private /32 prefixes.


any advice on how to achive this ?


Thank you so much in advance.



  • 0 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!