My lab firewall runs PAN-OS 9 (beta) firmware. I noticed, that expedition won't handle the traffic logs from that unit due to changes in the output of the log.
I'm not sure, where we are with support for PAN-OS 9 on expedition and wonder if somone possibly wrote script to "sanitize" logfiles....
Here it is:
Domain,Receive Time,Serial #,Type,Threat/Content Type,Config Version,Generate Time,Source address,Destination address,NAT Source IP,NAT Destination IP,Rule,Source User,Destination User,Application,Virtual System,Source Zone,Destination Zone,Inbound Interface,Outbound Interface,Log Action,Time Logged,Session ID,Repeat Count,Source Port,Destination Port,NAT Source Port,NAT Destination Port,Flags,IP Protocol,Action,Bytes,Bytes Sent,Bytes Received,Packets,Start Time,Elapsed Time (sec),Category,tpadding,Sequence Number,Action Flags,Source Country,Destination Country,cpadding,Packets Sent,Packets Received,Session End Reason,DG Hierarchy Level 1,DG Hierarchy Level 2,DG Hierarchy Level 3,DG Hierarchy Level 4,Virtual System Name,Device Name,Action Source,Source VM UUID,Destination VM UUID,Tunnel ID/IMSI,Monitor Tag/IMEI,Parent Session ID,Parent Session Start Time,Tunnel,SCTP Association ID,SCTP Chunks,SCTP Chunks Sent,SCTP Chunks Received,UUID for rule,HTTP/2 Connection
Have a good weekend, Walter
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!