- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
10-10-2023 05:28 AM
I just setup the expedition VM in my VMware. Its
VM is remotely accessible over SSH. However, the VM is not accessible through Web GUI (Expedition)
Please advise, how to troubleshoot and fix the issue.
Distributor ID: Ubuntu
Description: Ubuntu 20.04.6 LTS
Release: 20.04
Network INFO
expedition@expedition:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0c:29:20:70:36 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.250/24 brd 192.168.1.255 scope global ens160
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe20:7036/64 scope link
valid_lft forever preferred_lft forever
Server is not showing any listen port with 443
expedition@expedition:~$ sudo ss -ltnp
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
LISTEN 0 4096 127.0.0.53%lo:53 0.0.0.0:* users:(("systemd-resolve",pid=862,fd=13))
LISTEN 0 128 0.0.0.0:22 0.0.0.0:* users:(("sshd",pid=930,fd=3))
LISTEN 0 128 [::]:22 [::]:* users:(("sshd",pid=930,fd=4))
expedition@expedition:~$
10-10-2023 08:34 AM
Hi @shafimathew Could you please try below step to reinstall expedition:
1. Remove the tc.log file as it became corrupt.
sudo rm /var/lib/mysql/tc.log
2. Then reinstalled expedition
sudo apt-get install --reinstall expedition-beta
10-10-2023 08:01 PM
Not the OP, but having the same issue: fresh OS and Expedition installation, nothing listening on 443. I performed your instructions, but the issue persists. At the bottom of the reinstall process I see this:
Impossing PHP CLI 7.0
update-alternatives: error: no alternatives for php
Make /tmp writable by Apache2
sed: can't read /lib/systemd/system/apache2.service: No such file or directory
Failed to restart apache2.service: Unit apache2.service not found.
I thought I saw LAMP getting installed during the full install process but I'm not seeing Apache installed. I'm assuming Apache is the web server being used by Expedition.
dpkg --get-selections | grep apache
No results returned.
10-14-2023 03:05 AM
I am experiencing a similar issue, although there are some additional aspects,
Failed to start panReadOrders.service: Unit panReadOrders.service not found. is one of the issues faced, as there is no '/var/www/html/OS/startup/panReadOrdersStarter' I am using Ubuntu 20.04.6, I followed the commands above but get a timed out connection when reinstalling expedition, any ideas ?
10-16-2023 01:03 PM
Dear @laurence64
Thanks for reaching out.
Frequent errors while executing the installation script (located here: https://conversionupdates.paloaltonetworks.com/expedition1_Installer_latest.tgz) are:
Please review that you are not running on one of the above errors and let us know if you have any additional doubt or suggestion.
Best regards,
David
10-24-2023 10:27 PM
Sorry for the late reply and thank you for your response, I am fairly sure that I covered most of the points, but possibly not all, I will try and install again making sure that all your above points are addressed, I am sure there will be something I missed somewhere in there!
Will update with my progress, thank you again!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!